BlaCkinkGJ / Flash-Board-Tester

:white_check_mark: The testing program validates the BlueDBM flashboard for the ZCU102 motherboard.

BlueDBM Board Tester

Overview

This program tests the BlueDBM flash board in the ZCU102 motherboard.

Prerequisite

You must install the following packages.

sudo apt update -y
sudo apt install gcc g++ make libssl-dev libglib2.0-dev

Build and Run

First of all, you have to move the root directory. Then, you can find a file named build.sh. And type the below commands in your shell.

chmod +x ./build.sh
./build.sh

Now, you can get the execution tester program named nohost.exe in the project directory.

If you want to test the board, you execute that file.

Install library

You can install the library by using ./build.sh install. After executing this command, you can use the library without -L flags. In other words, you can use a library like below.

g++ -D USER_MODE *.c -lmemio -lpthread -lcrypto -I/usr/local/include/memio

How to use

You can test the device by tuning the below factors.

name	path	contents
WRITE_START	project/main.c	start segment/block number
WRITE_END	project/main.c	last segment/block number (NOT INCLUDE)

Additionally, you are able to manipulate the device information in the project/include/settings.h.

HOWEVER, you must also change parameters in the below files.

devices/common/dev_params.c
devices/nohost/dm_nohost.cpp
devices/nohost/dm_nohost_org.cpp