vyruz1986 / FlyballETS-Hardware

The FlyballETS-Hardware project is a subproject of the Flyball ETS project.

https://www.sparkydevices.com/tag/flyball-ets/

vyruz1986/FlyballETS-Hardware Issues

ESP32 board prototype: No connector for sensor LEDs
Updated 7 years ago
ESP32 board prototype: BC557 seems to be wrong footprint
Updated 7 years ago
ESP32 board prototype: R1 pad1 not connected, should be connected to GND
Updated 7 years ago
ESP32 board prototype: Final DRC was not run, copper planes wrong
Updated 7 years ago
Screw holes are too close to components
Closed 7 years ago
Pin numbering between power board and lights board is wrong
Closed 7 years ago
Resistor values on PowerBoard are not practical
Closed 7 years ago
Pin numbering on JST-XH connectors is reversed
Closed 7 years ago
Light colors should be marked on PCB
Closed 7 years ago
Lightsboard: Pin numbers on Lx-x connectors are reversed
Closed 9 years ago1
LightsBoard: Issues with 74HC595
Closed 9 years ago