voltlog

kicad-jlcpcb-tools

Plugin to generate BOM + CPL files for JLCPCB, assigning LCSC part numbers directly from the plugin, query the JLCPCB parts database, lookup datasheets and much more.

SparkFun_USB251x_Arduino_Library

Configure the PID/VID and power consumption settings on the USB2514X USB Hub.

zigbee_home

Project to provide functionality similar to ESPHome but for Zigbee instead of WiFi for nRF52

weather-card

Weather Card with animated icons for Home Assistant Lovelace

tasmotizer

ESP... The time has come to... Tasmotize!

ESP_Flasher

Tasmota Flasher for ESP8266 and ESP32x

epdiy

EPDiy is a driver board for affordable e-Paper (or E-ink) displays.

cp210x-program

EEPROM tool for Silabs CP210x USB-Serial adapter

nut

The Network UPS Tools repository. UPS management protocol Informational RFC 9271 published by IETF at https://www.rfc-editor.org/info/rfc9271 Please star NUT on GitHub, this helps with sponsorships!

freepad

FreePad

ZSWatch

ZSWatch - the Open Source Zephyr™ based Smartwatch, including both HW and FW.

lxi-tools

Open source LXI tools

bare-metal-series

Code for the "Bare Metal Series" videos

esp-multical21

ESP8266/ESP32 decrypts wireless MBus frames from a Multical21 water meter

stm32f0-pico-dump

STM32F0x Protected Firmware Dumper with Raspberry Pi Pico

pyFIS

Unified Python library for controlling devices in the passenger information realm

bitinfo

A command line tool to make working with registers easier.

WireViz

Easily document cables and wiring harnesses.

qFlipper

qFlipper — desktop application for updating Flipper Zero firmware via PC

blackmagic-esp32-s2

openhaystack

Build your own 'AirTags' 🏷 today! Framework for tracking personal Bluetooth devices via Apple's massive Find My network.

multizone-thermostat

This is a home assistant custom component. It is a thermostat including various control options, such as: on-off, PID, weather controlled. The thermostat can be used in stand-alone mode or as zoned heating (master- satellites).

multizone_generic_thermostat

Home Assistant generic thermostat component that supports controlling of multiple zones

ebus-adapter

vacuum-stencil-box

BMW-M2-DCT-Gear-indicator

OBD2 / CAN bus to display current gear in a BMW M2 with DCT

WiFi-Thermostat-ESP32-and-Arduino

displayArray

The display array is a board that sets 6 ST7735 display with a resolution of 80x160px in a linear array sharing the clock, data, rs, backlight pins together, and leaving individual access to the cs lines of each display, This board allows you to display images with a resolution of 480x160px.

hass-config

✨ A different take on designing a Lovelace UI (Dashboard)

Scenic2DashCanEmu

A arduino based lowcost CAN-Emulator for repairing Renaults Scenic 2 dashboards / instrument cluster.