vroland / epdiy

EPDiy is a driver board for affordable e-Paper (or E-ink) displays.

https://vroland.github.io/epdiy-hardware/

Repository from Github https://github.comvroland/epdiy

vroland/epdiy Issues

[S3] epd_board_poweron will block while using i2s audio.
Closed 10 months ago10
[Question] Detecting broken/smashed epaper displays by TPS65185 VOM kick-back voltage?
Closed 8 months ago24
ESP32-S3 R16 (16M PSRAM) Seems not supported.
Closed 8 months ago1
The timing diagram for driving the 9-inch A090XE01 V6 ink screen is as follows
Updated 8 months ago16
Lillygo T5-4.7: task_wdt: Task watchdog got triggered.
Updated 8 months ago8
How to solve i2c: This driver is an old driver
Updated 8 months ago1
Using the V7 board, the program stuck here, did not go down
Closed 8 months ago2
Did you cancel the E-Paper Driver option? Why can't I find it
Closed 9 months ago1
Will 7 colors epaper be supported in S3 board? Such as EC060KH3, EC078KH5?
Closed 9 months ago7
Add support for ED052TC4 (5.2" 720×1280)
Closed 9 months ago11
Features lost with "Dropped Support" boards?
Closed 9 months ago1
Adding Lilygo new S3 board
Closed 9 months ago3
ED078KC2 powering issue
Closed 9 months ago2
Framebuffer size in PSRAM limited to around 2 MB
Closed 10 months ago3
waveform_hdrgen.py: Two minors bugs (mode filter and temperature range) and one proposal to support non 5 bpp waveforms in JSON
Closed 10 months ago3
Implement Wokwi testing
Closed 10 months ago13
Es120mc1 Support
Closed 10 months ago1
How to Test Touch Functionality on ED060KD1 Screen
Closed a year ago1
Help with determining power consumption of epdiy
Closed a year ago1
Last pixel per line does not change on display
Updated a year ago8
The V5 and V7 board drive the same eink display, and the display effect is different
Updated a year ago7
The `ED060XC3` waveform on s3 cann't render 060XCD, 060XCH clearly with MODE_DU mode.
Closed a year ago4
The Readme states ED060SC4 is compatible but it isn't
Closed a year ago7
epd_renderer_init failing on v7 board
Closed 2 years ago6
Will epd_push_pixels_lcd in s3 support partial area?
Closed a year ago9
Boot / reset buttons in v7 board?
Closed a year ago8
Update platformio registry to 2.0.0
Updated a year ago2
MODE_PACKING_2PPB renders "stripes"
Closed a year ago12
Built-in WBF parser in EPDIY firmware?
Closed a year ago3
Crashed when used in conjunction of NimBLE-Arduino + Wi-Fi
Closed a year ago8
Weird behaviour on ESP-IDF v5.3
Closed a year ago19
Prepare v7 lcd_driver.c to be ready for IDF 5.3
Closed a year ago6
v7 board stack in battery charging mode
Closed a year ago2
epd_write_string confusion
Closed a year ago11
opensans10.h broken
Closed a year ago1
Cppcheck-Nitpicking
Closed a year ago
kicad schematics
Closed a year ago5
Why epd_hl_update_area always redraw fullscreen in s3_lcd branch?
Closed a year ago9
It there a way to adjust vcom by code or by hand on s3 board?
Closed a year ago2
Errors on esp32s3 compile
Closed a year ago3
please change license to MIT
Closed a year ago3
Areas of the screen not in the rendering area will become lighter in color.
Updated a year ago30
ED060SCL support
Closed 2 years ago1
Slack link is dead
Closed 2 years ago1
Support for ED060KG1 screen
Closed 2 years ago4
Epdiyv7 with ED060SC7
Closed 2 years ago
is lower psram usage possible?
Closed 2 years ago3
epdiy v7 - no border connection?
Closed 2 years ago8
Out-of-date documents
Closed 2 years ago2
Cutting Legacy Features for Maintainability - Do you use any of them?
Updated 2 years ago6