The project aims at bringing UAVCAN devices to hobbyists at low cost.
Project web page http://www.olliw.eu/2017/uavcan-for-hobbyists/
Project blog http://www.olliw.eu/2018/uavcan-for-hobbyists-blog/
This project comprises these UAVCAN nodes and devices:
UC4H GPS-Magnetometer-Barometer Node
UC4H PowerBrick Node
UC4H ESC-Actuator Node
UC4H RangeFinder Node
UC4H Display Node
UC4H Notify Node
UC4H OreoLED Node
UC4H IndicatorLED Node
UC4H UartBridge Node
UC4H Air/Airspeed Node
UC4H FunThing Node
UC4H MavlinkBridge
UC4H SLCAN Adapter
UC4H Cube Carrier
The material provided in the UC4H Github repository is subject to the following conditions.
Firmware files: All firmwares are free (but not open source). Besides unlimited private use you are also granted the permission to use them for commercial purposes under the condition that (1) you don’t modify the firmware, e.g. remove or change copyright statements, (2) provide it for free, i.e. don’t charge any explicit or implicit fees to your customers, and (3) correctly and clearly cite the origin of the firmware and the project web page in any product documentation or web page.
Hardware files: All hardware, for which material is provided, is open source hardware, under the terms of the TAPR Open Hardware License as published by the Free Hardware Foundation, see http://www.tapr.org/ohl.html. The TAPR license explicitly permits essentially unlimited commercial use, with only few conditions such as that copyright logos are not removed.
The UC4H firmwares make use of Libcanard: https://github.com/UAVCAN/libcanard . Many thanks to the UAVCAN team, and Pavel Kirienko especially, the main author of Libcanard.