itsy-bitsy-nrf52840
There are 0 repository under itsy-bitsy-nrf52840 topic.
Brezensalzer / ble_sensor
Bluetooth Low Energy Sensor with Adafruit ItsyBitsy nRF52840 and BME280 module
Language:C++ 4milador / Enabled-Controller-Wireless
A bluetooth enabled switch interface and an accessible game controller interface in one device.
Language:C++ 2BLE advertising sensor node. Modified Adafruit ItsyBitsy nRF52840 with MS8607 sensor and 2.7µA deep sleep current
Language:C++ 1Sensor node as OpenThread sleepy end device.
Language:C++ 1khoih-prog / nRF52_Slow_PWM
This library enables you to use ISR-based PWM channels on an nRF52-based board using Adafruit_nRF52_Arduino core such as Itsy-Bitsy nRF52840 to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is they're ISR-based PWM channels, supporting lower PWM frequencies with suitable accuracy. Their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These ISR-based PWMs, still work even if other software functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software-based PWM using millis() or micros(). That's necessary if you need to control devices requiring high precision
Language:C++