There are 0 repository under feather-nrf52840-express topic.
A project that uses the nRF52 to control a neopixel (ws2812b) over BLE using a custom mobile app built using the ionic framework.
This library enables you to use Hardware-based PWM channels on nRF52-based boards to create and output PWM to pins. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.
Bluetooth Low Energy Environmental Sensor for Adafruit nRF52840 Express and Adafruit BME680.
Just a little project to mod a Nerf blaster with Arduino compatible hardware and Bluetooth support.
This library enables you to use ISR-based PWM channels on an nRF52-based board using Adafruit_nRF52_Arduino core such as Itsy-Bitsy nRF52840 to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is they're ISR-based PWM channels, supporting lower PWM frequencies with suitable accuracy. Their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These ISR-based PWMs, still work even if other software functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software-based PWM using millis() or micros(). That's necessary if you need to control devices requiring high precision