thirtythreeforty / businesscard-linux

A Buildroot distribution small enough to run on my business card

https://www.thirtythreeforty.net/posts/2019/12/my-business-card-runs-linux/

thirtythreeforty/businesscard-linux Issues

H264 decode support for F1C100S or F1C200S. Binary Blog or Open Source? taobao has a reference design board
Updated 6 months ago29
Unknown CMake command "SHLOMIF_COMMON_SETUP"
Updated a year ago11
Error, no UBI device selected!
Updated 2 years ago
W25Q128 SPI FLASH can not boot correctly
Updated 2 years ago2
Help with compiling
Closed 2 years ago
Unknown error
Updated 2 years ago
[Question] Does not use SD card, so copying to SPI memory will work?
Updated 2 years ago
The system heartbeat light does not work.
Closed 2 years ago1
could the contents of the USB device be written or deleted?
Updated 3 years ago
Issue Building - host-squashfs
Closed 3 years ago2
ethernet-over-usb in LicheeNano
Updated 3 years ago2
Build error for Lichee Pi Nano + wifi
Updated 3 years ago6
unrecognized JEDEC id bytes: 0b, 40, 18
Closed 4 years ago23
Businesscard-linux with Computer Vision Tools
Updated 4 years ago
Reboot doesn't work
Updated 4 years ago5
TV Out for the business card?
Updated 4 years ago26
Unknown CMake command "SHLOMIF_COMMON_SETUP"
Closed 4 years ago2
Boot from SDCard
Updated 4 years ago3
f1c200s
Closed 4 years ago7
build failed
Closed 4 years ago4
Polyfuse
Closed 4 years ago2
Build error: "You have legacy configuration in your .config"
Closed 5 years ago2
about build tools
Closed 5 years ago3
About the use of crystal
Closed 5 years ago2
BOM
Closed 5 years ago2
could you provide the pcb file?
Closed 5 years ago1