Giters
sufst
/
pcb
Monorepo for all schematics and PCB designs
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
7
Watchers:
0
Issues:
41
Forks:
sufst/pcb Issues
bug(hvs): non-standard resistor values
Updated
a year ago
Comments count
1
bug(vcu): R2D and VC LED outputs swapped
Updated
a year ago
bug(bspd): shutdown connector silkscreen swapped
Updated
a year ago
bug(hvs): incorrect silkscreen for PS1
Closed
a year ago
chore: update to KiCad 7
Closed
a year ago
bug(vcu): EEPROM IC orientation not clear on silkscreen
Updated
a year ago
bug(vcu): button connections not identified on silkscreen
Updated
a year ago
feat(vcu): label power input polarity on front silkscreen
Updated
a year ago
bug(hvs): missing / modified symbols
Updated
2 years ago
Comments count
1
feat(vcu): add connections for shield grounds
Closed
2 years ago
feat(vcu): add steering angle sensor input
Closed
2 years ago
feat(latching): change connector orientation to horizontal
Closed
2 years ago
Comments count
1
feat(vcu): pull down SCS inputs
Closed
2 years ago
bug(latching): IMD input not pulled down
Closed
2 years ago
bug(latching): signals latch to wrong state
Closed
2 years ago
feat(latching): add labels
Closed
2 years ago
feat(bspd): add indicator LEDs
Closed
2 years ago
bug(bspd): bad footprint for transistor
Closed
2 years ago
bug(bspd): brake plausibility comparator not powered
Closed
2 years ago
bug(?): `Molex-MicroFit-430450400.step` incorrectly named
Updated
2 years ago
Comments count
1
feat(vcu): add CMOS buffer to input and output level shifters
Closed
2 years ago
bug(vcu): output optocoupler at 3.3V instead of 12V
Closed
2 years ago
bug(vcu): analogue inputs not buffered
Closed
2 years ago
feat(vcu): update DRS servo hardware to 12V
Closed
2 years ago
bug(vcu): 5V regulator tab is not ground
Closed
2 years ago
bug(latching): latching mechanic not working
Closed
2 years ago
Comments count
2
bug(tsal): Molex connectors should be reversed
Updated
2 years ago
bug(vcu): Molex connectors should be reversed
Closed
2 years ago
bug(tsal): not enough connections for LED outputs
Closed
2 years ago
feat(segment): thicken traces between voltage taps inputs and fuses
Closed
2 years ago
feat(vcu): optional termination for CAN transceivers
Closed
2 years ago
chore: create pull request template
Closed
2 years ago
chore(precharge): move symbols, footprints and step files to shared library
Closed
2 years ago
docs: add repo usage instructions to README
Closed
2 years ago
chore(bspd): remove version number from project/schematic file names
Closed
2 years ago
bug(tsal): fp-lib-table contains user-specific paths
Closed
2 years ago
Comments count
1
feat: import existing designs
Closed
2 years ago
Comments count
1
feat(vcu): replace DRS driver with timer pin output
Closed
2 years ago
bug(vcu): CAN transceiver not 3.3V compatible
Closed
2 years ago
Comments count
1
feat(vcu): add EEPROM memory
Closed
2 years ago
feat(vcu): update to STM32-F746ZG board
Closed
2 years ago