Giters
ros-drivers
/
urg_node
ROS wrapper for the Hokuyo urg_c library.
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
99
Watchers:
15
Issues:
60
Forks:
146
ros-drivers/urg_node Issues
To get Diagnostic data such as Error codes and also Field switching using inputs
Updated
2 months ago
ros parametor angle_min&angle_max are not valid
Closed
4 months ago
Could not open network Hokuyo
Closed
4 years ago
Comments count
3
Error connecting to Hokuyo: Could not open network Hokuyo
Updated
4 months ago
Comments count
2
ros2 urg_node parameter file
Closed
4 months ago
Comments count
6
Cannot get Hokuyo status
Updated
a year ago
Comments count
1
invalid response error when connecting to hokuyo from systemd machine tag
Closed
a year ago
Comments count
1
uam-05lp stops publishing data
Updated
2 years ago
Comments count
4
hokuyo UST-10lx LiDAR data not consistent
Updated
2 years ago
Comments count
1
Hokuyo UST-10LX keeps blinking when powered.
Updated
3 years ago
How to get laser status from hokuyo while grabdata?
Updated
3 years ago
reconnecting but the net is fine
Updated
3 years ago
Comments count
1
how to open lms文件
Updated
3 years ago
Hi can someone help me with ros kinetic + urg_node on raspbian OS PI4
Updated
3 years ago
Stopped working after updating to newest release
Closed
4 years ago
Comments count
10
property "IMPORTED_LOCATION" is not allowed.
Closed
3 years ago
Comments count
1
rostopic timestamp
Closed
3 years ago
Comments count
1
How to disable interpolation for the sensor data (ros2-devel branch)
Closed
3 years ago
Comments count
5
max & min distance parameters are needed
Updated
4 years ago
ROS2 Maintainer?
Closed
4 years ago
Comments count
11
ROS2 Support laser_proc Problem
Closed
4 years ago
Comments count
1
How do call "UrgNode::run()" in latest code on ros2-devel branch
Closed
4 years ago
Comments count
3
No executable found with `ros2 run urg_node urg_node` command on ROS 2 dashing
Closed
4 years ago
Comments count
6
ROS 2 support
Closed
4 years ago
Comments count
32
Segfault after I git clone and build,however it's ok when i install by APT
Updated
4 years ago
Noetic: segfault after connection success with package from APT
Updated
4 years ago
Comments count
2
Noetic release
Closed
4 years ago
Comments count
1
set ip script accept not valid ip addresses and send them to the scanner
Updated
4 years ago
Could not calibrate time offset: Time is out of dual 32-bit range
Updated
4 years ago
Comments count
2
dynamic reconfigure Error
Updated
4 years ago
Problems with Hokuyo 04LX
Closed
7 years ago
Comments count
4
Startup failure
Updated
4 years ago
Comments count
1
What could cause an "Abnormal status" error?
Closed
4 years ago
Comments count
2
Bad initial connection disables intensity publishing
Updated
4 years ago
Adjust scan publish frequency
Closed
4 years ago
udev rule don't work
Updated
4 years ago
Compiling error
Updated
5 years ago
The new AR00 function breaks urg_node
Closed
6 years ago
Comments count
4
connecting multiple hokuyo UTM-30LX
Updated
5 years ago
Comments count
2
Error count exceeded limit
Updated
5 years ago
Melodic release please!
Closed
6 years ago
Comments count
5
CMake Error
Updated
6 years ago
Comments count
1
Protocol
Closed
6 years ago
urg_node failed on Intel NUC / swapping issue
Closed
6 years ago
Comments count
2
urg_node error
Updated
7 years ago
can't change the hokuyo utm-30lx-ew ip addess using set_urg_ip.py
Updated
7 years ago
Comments count
2
Problem with Hokuyo UBG-04LX-F01
Updated
7 years ago
Request to release for ROS Kinetic
Closed
7 years ago
Comments count
12
Update maintainers?
Closed
7 years ago
Comments count
1
Memory corrption
Updated
8 years ago
Previous
Next