platisd / smartcar_shield

A versatile and easy to use vehicle platform for hobby-grade projects

Home Page:http://plat.is/smartcar

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Smartcar shield

Tests Examples Documentation codecov CII Best Practices BCH compliance

A versatile and easy to use vehicle platform for hobby-grade projects

Description

This repository, includes everything necessary to set up a Smartcar platform. The Smartcar, is a vehicular educational platform, which enables the user to develop various robotic applications in an affordable, pedagogic and easy way. It is intended for persons with basic programming knowledge and little to no experience of electronics, mechanics or robotics. More experienced users, should also find this approach convenient, due to its open source nature, high level API and object oriented design.

Hardware

Despite the software being hardware-agnostic, historically, development has been based on specific hardware. Initially, the Smartcar shield was used on top of an Arduino, using cheap car kits. This setup will be referred to as shield or v1.

Since the winter of 2019, a new platform was developed from scratch, using the WiFi and Bluetooth enabled ESP32 as the vehicle's "brain". This setup will be referred to as platform or v2 and will be considered the default one from now on. It offers greater robustness and many more possibilities, as it offers out-of-the-box connectivity.

Platform

smartcar platform

The Smartcar platform is a complete hardware solution for your hobby-grade, connected vehicle project. It is comprised of the chassis, made out of printed circuit boards, stacked on each other and an ESP32 development board that drives the motors, controls the sensors and communicates with the world via WiFi and Bluetooth.

There are 4 motors with directional odometers which enable not only to determine how much the wheels have moved but also the direction they spin. It is equipped with a GY-50 gyroscope module (based on the L3G4200D sensor) to provide heading information and sockets to optionally connect 4 VL45L0X LIDAR sensors to provide distance measurements. It is powered up by 8 AA batteries and you can find the boards' source files in extras/eagle/smartcar_platform.

Shield

smartcar_shield

The Smartcar shield is an open hardware PCB, that is effortlessly stacked on top of an Arduino. It includes an L293D H-bridge chip, that drives the motors, screw terminals to connect the motors and a battery to them and a GY-50 gyroscope module (based on the L3G4200D sensor). In extras/eagle/smartcar_shield you can find the design files for the board, in a modifiable form, using free software. There are also the options, to order it as-is, from either USA or China based manufacturers.

The Smartcar shield, facilitates efficient cable management, helps to preserve space and is as small as possible, in order to keep the manufacturing price low. Additionally, the components necessary to assemble it, are widely available over the Internet. Furthermore, you can find 2D CAD drawings of the Smartcar chassis in various formats, at /extras/cad/2D which you can freely use in order to fabricate your own, e.g. with a milling machine or a laser cutter.

Emulator

SMCE is the digital twin of the Smartcar platform along with a cool and customisable 3D world for your rover to roam in.
The core concept is that you write Arduino code that runs on both the real hardware as well as the virtual environment. This way, the need to have exclusive and frequent access to the car can be either alleviated or drastically decreased. The emulator allows limiting the unavoidable engagement with the physical car, to the point a team of developers may develop their features on the emulator and only access the real hardware to verify them.

Software

The software, is the Smartcar shield Arduino library. It sports a high level API, meant to enable its users to perform tasks easily with relatively few lines of code. It intends to hide implementation details or low level hardware operations. The library, handles the various components (i.e. the vehicle and the various sensors) as objects, therefore enabling trivial control over the car's functions. The various operations exposed by the API, are thoroughly explained in API Documentation. You can find examples on how to use the library, in /examples.

The library is versatile and is independent from the shield or specific hardware. Particularly, its most important feature is that it supports multiple ways of steering and throttling with different types of motors. Moreover, it is possible to steer the vehicle by rotating the wheels on each side at a different speed, like a tank as well as by using a servo motor. Another option is to use a brushed DC motor for steering, a setup that is very common in cheap RC cars. Additionally, apart of the default brushed DC motors that are connected to the Smartcar shield, you can also use an electronic speed controller (ESC) in order to drive (throttle) the vehicle, using the very same library.

If the Smartcar shield library is installed through the Library Manager of Arduino IDE, as recommended, the user will receive a notification in their IDE, when new versions are released making updates particularly easy, without the need to use GitHub or git.

Reference platforms

Smartcar platform (default setup)

Smartcar shield

  • Smartcar chassis
  • Smartcar shield PCB
  • L293D H-bridge
  • GY-50 gyroscope module
  • Two odometers (speed encoders) ([1] and [2] will suit commercially available chassis. [3] require some slight modifications)
  • Male & female pin headers (optionally get stackable Arduino headers too)
  • Five 2-pin screw terminals
  • Pin jumper
  • DIP16 socket
  • 0.1uF capacitors (2)
  • 100uF capacitor
  • 9V or 12V battery pack (do not use a single 9V battery)

Supported sensors

  • Distance sensors
    • Ultrasonic
      • HC-SR04
      • SRF08
    • Infrared
      • SHARP GP2D120
      • SHARP GP2Y0A02
      • SHARP GP2Y0A21
  • Gyroscopes
    • GY-50 (L3G4200D)
  • Odometers
    • Directional (4+ pins)
    • Non-directional (3-pins)

How to get started

Dependencies

All dependencies should be downloaded automatically by the Arduino IDE's library manager.

Project documentation

License

MIT

About

A versatile and easy to use vehicle platform for hobby-grade projects

http://plat.is/smartcar

License:MIT License


Languages

Language:C++ 93.6%Language:CMake 5.6%Language:Shell 0.8%