vdcd

[if you want to support vdcd development, please consider to sponsor plan44]

vdcd is a free (opensource, GPLv3) home automation daemon for operating various types of home automation devices of various technologies under a common device model and API.

The vdcd project has started as, and is still used as, a virtual device connector (vdc) implementation for the Digital Strom home automation system. A vdc integrates third-party automation hardware as virtual devices into the Digital Strom system. Hence, the device model and API design originates from a cooperation with Digital Strom.

However, vdcd can also be operated as a fully standalone home automation controller (see --localcontroller commandline option) or as a matter bridge when used together with p44mbrd.

vdcd has ready-to-use implementation for various EnOcean devices, DALI lights (single dimmers, RGB and RGBW multi-channel color lights including DT6 and DT8 support), Philips hue LED color lights, WS281x RGB LED chains (directly on RPi, via p44-ledchain driver on MT7688), simple contacts and on-off switches connected to Linux GPIO and I2C pins, PWM outputs via i2c, DMX512 support via OLA or UART, console based debugging devices and a lot more.

When vdcd is built with p44script enabled, custom devices can be implemented as simple scripts. The p44script language has support for http and websocket APIs, MIDI, modbus, UART etc. and can make use of the p44lrgraphics subsystem to create complex LED matrix effects.

In addition to these built-in implementations, vdcd provides the plan44 vdcd external device API, a simple socket-based API that allows implementing custom devices as external scripts or programs in any language which can open socket connections (almost any, sample code for bash, C and nodeJS is included)

vdcd however is not limited to the set of features listed above - it is based on a generic C++ framework called p44vdc which is included as a submodule into this project.

p44vdc is designed for easily creating additional integrations for many other types of third-party hardware. The framework implements the entire complexity of the Digital Strom vDC API and the standard behaviour expected from Digital Strom buttons, inputs, (possibly dimming) outputs and various sensors.

For new hardware, only the actual access to the device's hardware needs to be implemented.

vdcd/p44vdc are based on a set of generic C++ utility classes called p44utils, which provides basic mechanisms for mainloop-based, nonblocking I/O driven automation daemons, as well as a script language, p44script. p44utils is also included as a submodule into this project.

If you like this project you might want to...

Join the plan44 community forum to ask questions and discuss vdcd related topics.
See github project to get the latest version of the software (the required p44vdc and p44utils submodules are also on github)
See digitalstrom.com and digitalstrom.org for more about Digital Strom.
not forget to support it via github sponsors or flattr

License

vdcd is licensed under the GPLv3 License (see COPYING).

If that's a problem for your particular application, I am open to provide a commercial license, please contact me at luz@plan44.ch.

Features

Implements the complete Digital Strom vDC API including behaviours for buttons, binary inputs, lights, color lights, sensors, heating valves and shadow blinds.
Provides the vDC API (which is based on protobuf) also in a JSON version, with additional features which allow building local web interfaces.
Optionally provides a second instance of the JSON api for connecting bridges to other types of home automation systems, in particular matter (see p44mbrd).
Provides the plan44 vdcd external device API for easily building custom devices as external scripts or programs.
Provides extended customisation features by using the p44script scripting language
Allows implementing fully dS compliant devices of all kinds completely in p44script without any external code needed.
Supports EnOcean TCM310 based gateway modules, connected via serial port or network
Supports Philips hue lights via the hue bridge and its JSON API
Supports building really fancy effect color LED lights out WS281x LED chip based LED chains/matrices, with moving segments, lightspots, gradients etc, based on p44lrgraphics, a graphics library specifically written for lo-res LED matrix displays. On Raspberry Pi, just connect a WS2812's data-in to RPi P1 Pin 12, GPIO 18 (thanks to the rpi_ws281x library). On MT7688 systems under OpenWrt, use the p44-ledchain kernel driver.
Supports DMX512 based lights via RS485 UART or via Open Lighting Architecture - OLA - single channel, RGB, RGBW, RGBWA, moving head.
Allows to use Linux GPIO pins (e.g. on RaspberryPi) as button inputs or on/off outputs
Allows to use Linux PWM output pins as dimmable outputs
Allows to use i2c and spi peripherals (supported chips e.g. TCA9555, PCF8574, PCA9685, MCP23017, MCP23S17, LM75, MCP3021, MAX1161x, MCP3008, MCP3002) for digital and analog I/O

Getting Started

To try it out

plan44.ch provides free RaspberryPi images named P44-LC-X (standalone controller / matter bridge) and P44-DSB-X (for use with Digital Strom) which contains a complete OpenWrt ready to run first experiments with virtual devices (for example driving GPIO pins of the Raspberry). You can download it from plan44.ch/automation/p44-lc-x.php and plan44.ch/automation/p44-dsb-x.php, resp., copy it to a SD Card, and use it with a RPi B, B+, 2,3 and 4.

Build it

Clone the github repository

git clone https://github.com/plan44/vdcd
Choose suitable branch:
- master: consistent state of current tested development version (builds, runs)
- luz: sometimes contains interesting work in progress not yet in master...
- testing: corresponds with testing version deployed to beta testers of P44-DSB-E/P44-DSB-DEH product users.
- production: corresponds with version productively used in current plan44.ch products (P44-DSB-E/E2/DEH/DEH2, P44-LC-DE)
consult the /docs folder: For building the vdcd, see "How to build vdcd on Linux.md" and "How to build and run vdcd on Mac OS X.md".

Build and run it in a Container

Clone the github repository

git clone https://github.com/plan44/vdcd
Set the vdcd branch you want to use (see above) (by changing the ENV BRANCH line in the Dockerfile; as-is, this is set to master)
Build container image

cd vdcd docker build -t myimagename .
Run vdcd as container, for the autodiscovery to work you have to mount your dbus and avahi-daemon socket into the container

docker run --network="host" -v /var/run/dbus:/var/run/dbus -v /var/run/avahi-daemon/socket:/var/run/avahi-daemon/socket myimagename vdcd [options]

Build it as an openwrt package

Include the plan44 OpenWrt feed and install/build the vdcd package.

Supporting vdcd

use it!
support development via github sponsors or flattr
Discuss it in the plan44 community forum.
contribute patches, report issues and suggest new functionality on github or in the forum.
build cool new device integrations and contribute those
Buy plan44.ch products - sales revenue is paying the time for contributing to opensource projects :-)

plan44 / vdcd