openquantumhardware / qick

QICK: Quantum Instrumentation Control Kit

openquantumhardware/qick Issues

Only 8 out 16 digital pins available.
Updated a day ago3
Do the decimated IQ samples from the ADC have the wrong phase relationship?
Updated 9 days ago2
B_PHASE class attribute missing on AxisSgMux4Vx classes
Closed 3 months ago2
pfb readout phase seems random while sweeping freq
Closed 4 months ago2
Unable to reproduce the results with the same ["pulse_gain"] paramter
Updated 4 months ago1
Read jump point and error of direct downconversion
Closed 5 months ago2
Adding a .simulate() to the AveragerProgram class?
Updated 5 months ago3
use a machine learning training algorithm from a different FPGA
Closed 6 months ago3
Read photodetector output -> ADC with the right input power and pulse gain
Closed 6 months ago1
Does the loopback test requires amplifier
Closed 7 months ago1
changed ADC port in tcl but unable to measure meaningful data in readout
Closed 7 months ago1
Unable to load bitstream to FPGA
Closed 7 months ago1
incomplete files in building new firmwire
Closed 7 months ago2
Unable to send a number with DAC and receive a number with ADC in a deterministic manner
Closed 7 months ago1
change ADC readout port with bitstream
Closed 4 months ago3
Unable to build my own firmwire
Closed 7 months ago3
Reuse QickSoc object when PL is already programmed
Closed 8 months ago2
Interpolation between pulses in AxisSgInt4V1
Closed 9 months ago2
A question regarding reset value of fifo_empty_r in axi_mst_write.sv
Closed 9 months ago2
Hardware loop frequency sweep ZCU216
Updated 9 months ago1
timming-violation for both zcu111 and zcu216 in 87895db
Closed 10 months ago4
ADC readouts corrupted with non white noise
Closed 8 months ago3
ZCU216 image has no static MAC address
Updated 10 months ago1
the link to gerber files is broken in qick/hardware/README.md
Closed a year ago2
ADC reading reading is too small
Updated a year ago1
Resetting ADC phase
Closed a year ago3
Can DAC228_T0_CH3 be used?
Closed a year ago2
[Errno 6] No such device or address
Closed a year ago3
Variable phase in ZCU216
Closed a year ago1
Using ZCU216 for controlling multiple flux qubits
Closed a year ago6
Unwanted triggering low voltage plateau
Closed a year ago3
Module import gives extraneous warning when used on non-Zynq platform
Closed a year ago1
Adding more DACs and ADCs (full capacity of the ZCU216) ?
Closed a year ago2
Possible mismatch in time registers name
Closed a year ago4
Fast reset and hardware classification
Closed a year ago4
Clarification on intended behaviour of `AveragerProgram.trigger()`
Updated 2 months ago3
Duration Sweepers
Closed a year ago2
Determine Whether to Play Pulse or Not Based on Readout Results
Closed a year ago3
Gain: DAC units mapping to dbm
Closed a year ago2
Behaviour not expected in the reconstruction of signals by the DACs on a ZCU111
Closed a year ago4
Maximum number of pulses
Closed a year ago4
Dynamic range control for ADC
Updated a year ago1
Multiplexed readout phase
Closed a year ago4
ZCU216 DAC seems to not follow the external ref 10MHz clock.
Closed a year ago5
External trigger via PMOD
Closed a year ago3
RuntimeError: frequency collision (multiplexing)
Closed a year ago4
Potential bug using freq2reg_adc to assign adc frequency
Closed a year ago1
Problem with Ramsey measurement using AveragerProgram
Closed a year ago6
phase coherent readout with multiplexed readout
Closed a year ago13
Using the P/N differencial ports on the XM500 board (ZCU111)
Closed a year ago5