Giters
open-traffic-generator
/
ixia-c
Ixia-c Traffic Generator
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
180
Watchers:
16
Issues:
87
Forks:
18
open-traffic-generator/ixia-c Issues
bursty traffic caused when flow count > 1 per port
Updated
a month ago
ixiatg-configmap has a typo
Closed
2 months ago
Comments count
3
TE-3.7: OTG pushconfig is failing
Closed
4 months ago
Comments count
2
TE-3.5 , TE-3.6 : failign to get ARP entry as protocol start missing after OTG config
Closed
4 months ago
Comments count
2
Traffic config failing with error "No port found for OTG device name ateSrc.BGP4.peer\"
Updated
4 months ago
Comments count
1
Need support for IPoUDP stack and loopback config for GUEv1/UDP tunnel
Updated
4 months ago
Comments count
2
Need support for Tunnel encapsulation attribute
Updated
4 months ago
bug: ipv4.header.priority.raw with ixia-hw controller
Closed
5 months ago
Comments count
1
please add support for EVPN - VXLAN
Updated
7 months ago
hello_snappi.py looks broken
Updated
7 months ago
https://github.com/open-traffic-generator/ixia-c/blob/main/docs/readme.md error 404
Updated
7 months ago
Missing `10-ixia-enable-ipv6.conf`
Updated
9 months ago
Ixia-c-one 0.1.0-3 potential race condition with updating LocationMap
Updated
9 months ago
Unable to fetch bgp rib-in prefixes with gnmic on OTG
Closed
10 months ago
Comments count
2
can it be ran on arm cpus ?
Updated
10 months ago
Comments count
1
controller runtime error on `/monitor/metrics` for `Bgpv4` when location doesn't have protocol engine
Closed
a year ago
Comments count
1
Capability YAML for OTG models coverage
Updated
a year ago
gnmi get for out-pkts failing in OTG with ixia HW
Updated
a year ago
Comments count
2
TE-11.3: OTG inner IP header checksum is incorrect and causign for drops in decap
Updated
a year ago
Comments count
1
Ixia-c only transmitting with 10 Gbs on 100 GBs NIC card
Closed
a year ago
Comments count
6
FlowMetrics rate reporting is not multi-thread safe
Updated
a year ago
Login to Ixia container
Closed
a year ago
Comments count
1
Ixia-c Container - Data Interfaces - eth1, eth2 ......
Closed
a year ago
Comments count
1
Unable to send packet of different Vlan priority
Updated
a year ago
Comments count
1
Update documentation with WSL (Windows Subsystem for Linux) support info
Closed
a year ago
Comments count
4
Add support for IPv4 TTL `increment` and `decrement` patterns
Updated
a year ago
Comments count
3
Specifying fixed frame size of 3 or less leads to EOF API response
Closed
a year ago
Comments count
3
`store_forward` latency mode is not supported
Updated
a year ago
All components in ixia-c need to have only three version components - Major.Minor.Patch
Closed
a year ago
Comments count
1
Fetching BGP metrics using snappi against ixia-c-controller intermittently fails with `500 Internal Server Error`
Closed
a year ago
Comments count
1
Enable version check across all ixia-c components
Closed
a year ago
Comments count
1
Generating 100Gbps to prove Dual 100Gbps COnnectx5 and E810 CQDA2
Closed
a year ago
Comments count
2
OTG: RX stats missing in flow statistics even though port is recieving
Updated
a year ago
Comments count
2
[urgent][security] Remove TLS 1.0 and TLS1.1 from ixia-c controller
Closed
a year ago
Comments count
2
Randomly "context deadline exceeded" error seen while pushing config to ixia HW with OTG
Updated
a year ago
Release 0.0.1-3768 introduced unexpected changes in port stats for device-2-device raw TCP flows
Updated
a year ago
TCP header length is not set correctly
Closed
a year ago
Need support for fractional PPS value in flow duration
Updated
a year ago
Payload size field in all inner headers for tunneling protocols do not take into account inner FCS
Closed
a year ago
Comments count
1
opening socket: Address family not supported by protocol
Closed
2 years ago
Certificate error when pulling ixia-c-controller
Closed
2 years ago
Comments count
1
When flow duration is configured using `fixed_seconds`, then in some cases packet transmission does not stop after specified duration has elapsed
Closed
2 years ago
Comments count
1
Wrong values' increment in packet with several headers
Closed
2 years ago
Comments count
3
Ixia Container - Data interfaces - eth1, eth2
Closed
2 years ago
Comments count
2
demo1-snappi-ixia-c program issue , need help to resolve
Closed
2 years ago
Comments count
5
ixia-c-one deployment on ubuntu 22.04 fails
Closed
2 years ago
Comments count
1
Finalization of the behavior for set_transmit_state
Closed
2 years ago
Ability to use tools like Scapy to add headers for unsupported protocols.
Closed
2 years ago
Comments count
3
Unable to view traffic on vnet1 interface
Closed
2 years ago
Comments count
3
ether_type value in ethernet header configuration is set to default instead of the value provided in configuration
Closed
2 years ago
Comments count
2
Previous
Next