Aleksej Muratov's starred repositories
sigrok-pico
Use a raspberry pi pico (rp2040) as a logic analyzer and oscilloscope with sigrok
CatSniffer
CatSniffer is an original multiprotocol and multiband board for sniffing, communicating, and attacking IoT (Internet of Things) devices using the latest radio IoT protocols. It is a highly portable USB stick that integrates TI CC1352, Semtech SX1262, and an RP2040 for V3 or a Microchip SAMD21E17 for V2
rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
pico-rv32ima
Running Linux on RP2040 with the help of RISC-V emulation
esp32-s3-pinouts
ESP32-S3 Pinout Quick Guide
Zero_Linux_Board
一个Linux小电脑。(F1C200S, RP2040 Inside)
iCE40linux
Gateware / Firmware / BuildRoot to run linux on iCE40 / iCEBreaker
pico-usb-io-board
Raspberry Pi Pico USB I/O Board
Powercore-V2.0
Open-Source wire EDM power supply by Rack Robotics, Inc.
ECP5-Utils
Utilities for the ECP5 FPGA
usb_pd_monitor
USB PD cc pin monitor implemented in a Tang Nano 9K FPGA.
sd2snes_ecp5
Lattice ECP5 variant of SD2SNES
SDR_at86rf215
SDR design based on the AT86RF215 transceiver with IQ LVDS / FPGA DDR (dual-data-rate) interface
ulx3s.github.io
community projects that can be used with the ULX3S FPGA ESP32 board
USB-PD-Verilog
USB Type-C Power Delivery FPGA
ECP5U85-BSE-USB
USB development board featuring USB3.0, Lattice ECP5U85 FPGA, and Samtec BSE GPIO Headers
USB-PD-3.1-Verilog
USB-PD-3.1-Verilog