Giters
mangelajo
/
jumpstarter
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
2
Watchers:
4
Issues:
13
Forks:
mangelajo/jumpstarter Issues
Add a temperature sensor to have additional monitoring on the DUT
Updated
a year ago
RFE: Autonomous support by having an on-board SOM (bottom layer)
Updated
a year ago
Comments count
1
Add EMI/ESD protection to USB & IO traces
Updated
a year ago
Add reverse polarity protection for the barrel jack power input
Updated
a year ago
Update U4 schematic component, BS_SEL pin is incorrectly named now
Updated
a year ago
Add lower ESR capacitors on VBUS
Updated
a year ago
Check led resistor tuning, 1k hopefully "will be ok"
Updated
a year ago
Consider debouncing BUTTON signal if used for something else beyond DFU force
Updated
a year ago
Add more references to pins in silkscreen 1, 10, 20, 30, 40
Updated
a year ago
Consider curved traces for high speed signals
Updated
a year ago
More vias, may be smaller for power signal traces, measure the VIA resistivity when we have the prototype
Updated
a year ago
Move C5 further away from J2, they are too close
Updated
a year ago
Add protection for USBC + Barrel jack power connection used simultaneously
Updated
a year ago