Pete Lewis's repositories
audioflyer
Surround sound audio mixing controlled by serial commands. Making mixes that fly!
checklist_gui
Using python and Tkinter, this little GUI makes interacting with excel spreadsheets (checklists) so much fun!
headsupleds
While flying my RC airplane line-of-sight, I want to know some data from the plane (battery voltage, airspeed, turn coordination, G-forces). Maybe I can display this data in real time with some LEDs located in my peripheral vision. I'm gonna clip some electronics to my sunglasses and see how this goes :)
qwiic_jukebox
A DIY Jukebox using SparkFun qwiic boards. It uses RFID cards to "select" an MP3 and arcade buttons to play/pause/stop.
Servo_Force_Sensor
A small PCB with a hall effect sensor that can sense very slight movement of a magnet on a servo horn.
360image.github.io
Testing out how to do a 360 spin image on github pages
ambd_arduino
AmebaD Arduino third-party package SDK
Boulder_Bounces
Like the classic "Simon Says" 4-button memory game, but on trampolines. Wahoo!!
cracking-toast
A python tool for organizing recipes and creating grocery lists
CRC_Arduino_Simple
Create a CRC function using an Arduino and lots of serial terminal debug. Start simple and slow. Gain understanding.
hotglueleds
light patterns on some leds jammed into hot glue sticks
LeFish_Two_Piece_Wing
Laser cut files to do a two-piece wing setup on a LeFish RC Glider
library-registry
Arduino Library Manager list
OpenParent
An open source approach to parenting. Share knowledge, avoid the crying, have fun.
Pi_grammer
A shield for Raspberry Pi 2, used for programming AVR ICs. Includes capsense pad to engage, 3x2 ISP header for connectivity and status LEDs.
Qwiic_IMU_BNO080
Qwiic Breakout board for the BNO080 IMU
Serial_LCD_testbeds
This repo will house testbeds for the new Serial LCDs (both versions: 16x2, 20x4)
SnakePopBot
Launching the ol' snake-in-a-can gag into a new dimension!
SparkFun_Eagle_Settings
The Eagle settings SparkFun uses for board designs
ten_years_of_testbeds
An art installation highlighting 150+ retired test-beds from SparkFun Electronics Quality Control Department
uarm-pnp
Pick and place machine using a robotic arm and suction nozzle. It is intended to be used to pick up assembled circuit boards from a cartridge and place them onto a test jig (bed of nails style). Then after successful testing, place them back into another "good" cartridge. If boards to not pass testing, then they will be placed aside for rework.
vectorbot
A beacon/target positioning system using a rotating receiver and/or transmitter.