kermit0124 / gen_amba

AMBA bus generator including AXI, AHB, and APB

GEN_AMBA

'gen_amba' is a set of programs that generate AMBA bus Verilog-HDL, which include AMBA AXI, AMBA AHB, and AMBA APB.

• gen_amba_axi: AMBA AXI bus generator for multi-master and multi-slave
• gen_amba_ahb: AMBA AHB bus generator for multi-master and multi-slave
• gen_amba_apb: AMBA APB bus-bridge generator for AMBA AXI or AHB

License

This is licensed with the 2-clause BSD license to make the program and library useful in open and closed source products independent of their licensing scheme.

Prerequisites

This program requires followings.

• Shell: Bash
• GNU GCC: C compiler
• HDL simulator: Mentor Graphics ModelSim or icarus Verilog

Maturity

• RTL simulation
• FPGA proven (refer to CON-FMC)
• ASIC partially proven, but not whole yet

1. Quick start for AMBA AXI

1.1 generating AMBA AXI

1. go to 'gen_amba_axi' directory
   $ cd gen_amba_axi
2. run Makefile
   $ make cleanup
   $ make
   . It should generate 'gen_amba_axi'.
3. have a look the help message
   $ ./gen_amba_axi -h
4. generate AMBA AXI
   $ ./gen_amba_axi --mst=2 --slv=3 --out=amba_axi_m2s3.v
   . It generates an AXI bus ("amba_axi_m2s3.v") with 2 master-ports and 3 slave-ports.

1.2 verification AMBA AXI

1. go to 'gen_amba_axi/verification/sim/modelsim' directory
   $ cd gen_amba_axi/verification/sim/modelsim
   . Use 'iverilog' for Icarus Verilog.
2. run Makefile
   $ make cleanup
   $ make MST=2 SLV=3
   . It should generate necessary bus and top model and then invoke ModelSim simulator.
   . It uses top-level generator.
3. have a look the result VCD wave
   $ gtkwave wave.vcd

2. Quick start for AMBA AHB

2.1 generating AMBA AHB

1. go to 'gen_amba_ahb' directory
   $ cd gen_amba_ahb
2. run Makefile
   $ make cleanup
   $ make
   . It should generate 'gen_amba_ahb'.
3. have a look the help message
   $ ./gen_amba_ahb -h
4. generate AMBA AHB
   $ ./gen_amba_ahb --mst=2 --slv=3 --out=amba_ahb_m2s3.v
   . It generates an AHB bus ("amba_ahb_m2s3.v") with 2 master-ports and 3 slave-ports.

2.2 verification AMBA AHB

1. go to 'gen_amba_ahb/verification/sim/modelsim' directory
   $ cd gen_amba_ahb/verification/sim/modelsim
   . Use 'iverilog' for Icarus Verilog.
2. run Makefile
   $ make cleanup
   $ make MST=2 SLV=3
   . It should generate necessary bus and top model and then invoke ModelSim simulator.
   . It uses top-level generator.
3. have a look the result VCD wave
   $ gtkwave wave.vcd

3. GEN_AMBA

There is AMBA bus generator for each bus.

3.1 gen_amba_axi

It generates AMBA AXI switch.

Click to expand

$ ./gen_amba_axi -h
[Usage] ./gen_amba_axi [options]
	-m,--mst=num    num of masters (default: 2)
	-s,--slv=num    num of slaves  (default: 2)
	-d,--mod=str    module name (default: "amba_axi_mXsY")
	-p,--pre=str    prefix of module (default: none)
	-o,--out=file   output file name (stdout if not given)
	-v,--ver=num    verbose level  (default: 0)
	-l,--lic        print license message
	-h              print help message

3.2 gen_amba_ahb

It generates AMBA AHB bus.

Click to expand

$ ./gen_amba_ahb -h
[Usage] ./gen_amba_ahb [options]
	-t,--lite       AMBA AHB-lite
	-m,--mst=num    num of masters (default: 2)
	-s,--slv=num    num of slaves  (default: 2)
	-d,--mod=str    module name (default: "amba_ahb_mXsY")
	-p,--pre=str    prefix of module
	-o,--out=file   output file name (stdout if not given)
	-v,--ver=num    verbose level  (default: 0)
	-l,--lic        print license message
	-h              print help message

3.3 gen_amba_apb

It generates AMBA APB bus bridge for AHB or AXI.

Click to expand

$ ./gen_amba_apb -h
[Usage] ./gen_amba_apb [options]
	   --axi|ahb    make "axi_to_apb" or "ahb_to_apb" (apb if not given)
	-s,--slv=num    num of APB ports  (default: 2)
	-d,--mod=str    module name (default: "axi_to_apb_sX" or "ahb_to_apb_sX")
	-p,--pre=str    prefix of sub-module name (none if not given)
	-o,--out=file   output file name (stdout if not given)
	-v,--ver=num    verbose level  (default: 0)
	-l,--lic        print license message
	-h              print help message

4. GEN_TOP

There is top-level generator for each bus in 'verification' directory.

4.1 GEN_TOP for AMBA AXI

1. go to 'gen_amba_axi/verification'
   $ cd gen_amba_axi/verification
2. have a look the help message
   $ ./gen_axi_top.sh -h
3. generate a top-level
   $ ./gen_axi_top.sh -mst 2 -slv 2 -siz 1024 -out top.v
   . It generates a top-level verilog ("top.v") supporting two AXI masters and two AXI memories.
   . Each memory takes care of 1Kbyte range of memory; i.e., memory0 covers 0-1023 and memory1 covers 1024-2047.

Click to expand

$ ./gen_axi_top.sh -h
Usage : ./gen_axi_top.sh [options]
      -mst    num        :num of masters, 2
      -slv    num        :num of slaves, i.e., memories, 2
      -siz    bytes      :size of each slave in bytes, 1024
      -bus    module     :name of bus, 
      -out    file_name  :output file name, top.v
      -h/-?              :printf help

4.2 GEN_TOP for AMBA AHB

1. go to 'gen_amba_hb/verification'
   $ cd gen_amba_ahb/verification
2. have a look the help message
   $ ./gen_ahb_top.sh -h
3. generate a top-level
   $ ./gen_ahb_top.sh -mst 2 -slv 2 -siz 1024 -out top.v
   . It generates a top-level verilog ("top.v") supporting two AXI masters and two AXI memories.
   . Each memory takes care of 1Kbyte range of memory; i.e., memory0 covers 0-1023 and memory1 covers 1024-2047.

Click to expand

$ ./gen_ahb_top.sh -h
Usage : ./gen_ahb_top.sh [options]
      -mst    num        :num of masters, 2
      -slv    num        :num of slaves, i.e., memories, 2
      -siz    bytes      :size of each slave in bytes, 1024
      -bus    module     :name of bus, 
      -out    file_name  :output file name, top.v
      -h/-?              :printf help

4.3 GEN_TOP for AMBA APB

1. go to 'gen_amba_apb/verification'
   $ cd gen_amba_apb/verification
2. have a look the help message
   $ ./gen_apb_top.sh -h
3. generate a top-level
   $ ./gen_apb_top.sh -ahb -slv 2 -siz 1024 -out top.v
   . It generates a top-level verilog ("top.v") supporting AHB masters and two APB memories.
   . Each memory takes care of 1Kbyte range of memory; i.e., memory0 covers 0-1023 and memory1 covers 1024-2047.

Click to expand

$ ./gen_apb_top.sh -h
Usage : ./gen_apb_top.sh [options]
      -ahb|axi           :AHB or AXI master: ahb
      -slv    num        :num of slaves, i.e., memories, 2
      -siz    bytes      :size of each slave in bytes, 1024
      -bus    module     :name of bus, 
      -out    file_name  :output file name, top.v
      -h/-?              :printf help

5. Where to get more information

The author has been giving open lecture on AMBA bus at following two institutes.

• IDEC (IC Design Education Center) at KAIST: https://www.idec.or.kr
• SW-SoC Academy at ETRI: https://www.asic.net

6. Where it has been used

6.1 Future Design Systems CON-FMC^TM project

6.1.1 Gigabit Ethernet project

6.1.2 AMBA AXI project

6.1.3 AMBA AHB project

Other things

Autor(s)

• Ando Ki - Initial work - Future Design Systems

Acknowledgments