Jagoda Górska CH341SER Issues

juliagoda/CH341SER Issues

insmod: ERROR: could not insert module ch34x.ko: Key was rejected by service
Updated 6 months ago
module verification failed: signature and/or required key missing - tainting kernel
Closed 4 years ago8
This driver is too old, please refer to the new repo: https://github.com/WCHSoftGroup/ch341ser_linux
Updated 7 months ago
usbfs: interface 0 claimed by ch34x while 'brltty' sets config #1
Updated 7 months ago10
can`t make
Updated 8 months ago2
Segmentation Fault when accessing the tty device after load
Updated 9 months ago
brltty driver blocks use of CH340
Updated 10 months ago
Device not recognized
Closed a year ago1
This driver is not compatible with the Olimex ESP32-POE rev C board
Closed 5 years ago2
initialization of ‘unsigned int - Werror=incompatible-pointer-types
Updated a year ago1
CH340 keeps repetedly connecting and disconnecting
Closed a year ago1
Build failed on kernel 5.14.21
Updated a year ago1
`make` error on Linux Mint 20.2
Updated a year ago24
Build failed on PopOS 22.04
Updated a year ago
Repo transfer
Updated a year ago
incompatible-pointer-types error near ch34x_device.set_termios
Updated a year ago
make error on arch linux —— ch34x.c:1294:27: error: initialization of ‘void (*)(struct tty_struct *, struct usb
Closed a year ago5
CH340G
Updated a year ago
Test on Ubuntu fully succesfull
Updated 2 years ago12
on manjaro linux device detected but not initialized.
Updated 2 years ago3
Driver results in warning/trace
Updated 2 years ago4
Missing instructions for SecureBoot
Closed 2 years ago1
test ok in ubuntu 22.04
Closed 2 years ago
RPi 4 - Invalid module format
Closed 2 years ago1
Unable to compile -Arch Linux
Closed 2 years ago1
Just Feedback: Do not work on Debian 10.8
Updated 3 years ago3
Failing to compile on Arch Linux (with temporary solution)
Closed 3 years ago5
Failed to Compile on Ubuntu 16.04 LTS
Closed 3 years ago9
Does not compile on Linux Mint 19
Closed 3 years ago1
Need to add version check for include signal.h
Closed 4 years ago
Make detects "no control file" & Make load displays "Invalid module format"
Closed 4 years ago2
fails to compile on raspberry pi 4 raspberry os 64 bit
Updated 4 years ago1
Thanks for providing this driver.
Closed 4 years ago1
Showing that make[1]: *** No targets specified and no makefile found.
Closed 6 years ago2

juliagoda / CH341SER

juliagoda/CH341SER Issues

insmod: ERROR: could not insert module ch34x.ko: Key was rejected by service

module verification failed: signature and/or required key missing - tainting kernel

This driver is too old, please refer to the new repo: https://github.com/WCHSoftGroup/ch341ser_linux

usbfs: interface 0 claimed by ch34x while 'brltty' sets config #1

can`t make

Segmentation Fault when accessing the tty device after load

brltty driver blocks use of CH340

Device not recognized

This driver is not compatible with the Olimex ESP32-POE rev C board

initialization of ‘unsigned int - Werror=incompatible-pointer-types

CH340 keeps repetedly connecting and disconnecting

Build failed on kernel 5.14.21

`make` error on Linux Mint 20.2

Build failed on PopOS 22.04

Repo transfer

incompatible-pointer-types error near ch34x_device.set_termios

make error on arch linux —— ch34x.c:1294:27: error: initialization of ‘void ()(struct tty_struct , struct usb

CH340G

Test on Ubuntu fully succesfull

on manjaro linux device detected but not initialized.

Driver results in warning/trace

Missing instructions for SecureBoot

test ok in ubuntu 22.04

RPi 4 - Invalid module format

Unable to compile -Arch Linux

Just Feedback: Do not work on Debian 10.8

Failing to compile on Arch Linux (with temporary solution)

Failed to Compile on Ubuntu 16.04 LTS

Does not compile on Linux Mint 19

Need to add version check for include signal.h

Make detects "no control file" & Make load displays "Invalid module format"

fails to compile on raspberry pi 4 raspberry os 64 bit

Thanks for providing this driver.

Showing that make[1]: *** No targets specified and no makefile found.