hdlguy

make_for_vivado

experimentation with gnu make for Xilinx Vivado compilation. dependencies can be complicated.

zcu104_ubuntu

A project to demonstrate Xilinx MPSOC running Ubuntu

gps_sim

An attempt to synthesize GPS signals in FPGA logic.

heater

An FPGA "heater" design to use LFSR data to toggle logic for the purpose of stressing the power supply.

iir_filter

IIR digital filter implemented using Vivado HLS and C++

alinx

some files to test the new ALINX AXU2CG-E development board

arty_mac_test

A test design to see how the Tri-mode Ethernet MAC can be used in a small FPGA design.

kria_ubuntu

Ubuntu for FPGA control on Kria Vision AI Kit

petazed

A project to show Petalinux booting from QSPI on the MicroZed board.

zuboard

Some fpga and software logic to test out the new Avnet ZUBoard.

AD7946

logic to control the TI AD7946

fftw_test

This is a little program to run fftw on various machines as a crude benchmarking tool.

freertos_test

This is a project to understand data streaming under FreeRTOS on the Xilinx ZynqMP.

ftdi_sync_fifo

An attempt to use the synchronous fifo mode of the FTDI FT2232H USB transceiver.

litefury_pcie

A little project to provide the fpga design for a PCIe board being done in KiCad.

microblaze_command_processor

my_kicad

Miscellaneous KiCad work

ne10_test

A project to demonstrate the use of the Arm libNE10.a scientific computing librar.

streaming_uart

This project is to write a very simple uart with streaming fifo interface.

verilog-ethernet

Verilog Ethernet components for FPGA implementation

axi_stream_to_ddr

Experiments streaming data to memories - not mature

embedded-web-interface

Experimenting with ideas about controlling embedded hardware with a web interface.

FPGA-ftdi245fifo

FPGA-based USB fast communication using FT232H/FT600 chip.

i2c_simple

An attempt to write a very simple IIC interface for use in fpga designs.

kintex-pcie-board

KiCad project for Kintex 7 PCIe board

microblaze_ddr3_linux

I need to test the ddr3 interface on a board. Maybe I can then run Linux on a Microblaze.

pcie_fpga_kicad

PCI express libraries and templates for KiCad

pg_prng

A very light weight fpga pseudorandom number generator.

verilog-i2c

Verilog I2C interface for FPGA implementation (from alexforenchich!)

verilog_ulpi

A USB3318 is connected to a Xilinx Artix-7 100t. Let's go!