greearb / ath10k-ct

Stand-alone ath10k driver based on Candela Technologies Linux kernel.

greearb/ath10k-ct Issues

ATH10K Archer C7v2 running CT-full-HTT
Updated 6 months ago4
Problems with received vlan tagged frames
Updated 10 months ago1
TP-Link 245 v3 donation
Updated a year ago
ipq40xx: 802.11s unicast package loss while broadcast works
Updated a year ago26
ath10k-ct wave1 firmware crashes with usteer
Updated a year ago8
ath10k-ct-htt-mgt variants for QCA988X/QCA9887
Updated a year ago
bug Since release ath10k-5.2
Updated a year ago5
Devices connected to the same Wi-Fi using dynamic VLANs can’t ping each other
Updated 2 years ago1
ATH10K Wave2 AP mode no beacon
Updated 2 years ago3
qca9980 GTK rekey fails on 4-addr bridges
Updated 2 years ago4
Question: Support for encap offload in tx
Updated 2 years ago20
.
Closed 2 years ago
Netgear R7800 (qca9984) 5 GHz dies at random, even with active connections!
Updated 2 years ago1
Netgear R7800 ath10k-firmware-qca9984 breaks compatibility with older devices!
Updated 2 years ago
VHT160 Connects but not usable Kernel 5.4.0.99 Ubuntu 20.04 & Very latent when it does work at all
Updated 2 years ago12
Ubuntu 20.04 Compile 5.15.24 Kernel - Compile Error
Updated 2 years ago3
Driver Crash - Ubuntu Kernel 5.4.0.99 - ATH10K-CT 5.4 Driver
Closed 2 years ago2
Ath10K-CT With WLE1216V5-20 5Ghz with QCA9984
Closed 2 years ago12
Netgear R7800 Boot too long, Maybe ath10k_pci drive problem?
Updated 2 years ago
Debian 10.9, 5.10.24-1~bpo10+1 kernel, dmesg error, NIC not up
Closed 3 years ago3
qca9980 lacks airtime fariness support indication
Closed 3 years ago2
bad ping time on ubuntu vs openwrt
Closed 3 years ago2
linux 5.15.5 firmware-ct cause ath10k driver to crash
Closed 3 years ago5
Is This Packet Injection And Monitor Mode Supported ???
Closed 3 years ago
DFS support for VHT160 missing from the 5.15 based version?
Closed 3 years ago2
Wrong kernel version with 5.15 source
Closed 3 years ago1
Wifi Device is always disabled with travelmate
Updated 3 years ago7
ipq40xx: invalid VHT TX rate code 0xff. Is that right?
Updated 3 years ago
firmware ver 10.1-ct-8x-__fH-022-ecad3248 crashed
Closed 3 years ago8
Set tx-antenna pattern on a per-peer basis
Closed 3 years ago2
Issues with latest commit
Updated 3 years ago1
Issues occur when using STA + AP on 5Ghz [OpenWRT 19.07.7, Archer C7 V5]
Updated 3 years ago1
Firmware is crashing on tp-link router
Closed 3 years ago4
Firmware crash on UniFi AC Mesh
Closed 3 years ago12
WIFI freeze on TP Link C7 - Many hash collisions
Updated 3 years ago1
QCA988x Mesh mode support
Closed 3 years ago1
ath10k fails to load on Fritzbox 5490
Closed 3 years ago16
Problem loading CT ath10k firmware for QCA9984 device (PCI ID 168c:0046)
Updated 3 years ago13
Question: QBSS Load Element invalid values
Updated 3 years ago5
5ghz network drops on R7800
Closed 4 years ago7
r7800 kernel errors on openwrt 19.07.4
Updated 3 years ago1
[SUGGESTION] Please provide checksums for at least the firmware files offered on website.
Updated 3 years ago4
AP/VLAN hack and broadcast breakage on QCA988X
Updated 3 years ago
firmware crash
Closed 4 years ago2
NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support?
Updated 4 years ago
Support of WLE1216VX
Updated 4 years ago2
[QCA9984] Wireless AC 5GHZ cannot start
Closed 4 years ago4
Question: What are short slot times and why are they not supported.
Updated 4 years ago
Firmware feature request/suggest: Spectral Scan outside ISM bands
Updated 4 years ago
Info about tx encalp offload
Updated 4 years ago