Issues with latest commit
julianocss opened this issue · comments
Hi Ben.
The latest commit 8eca56d , it´s using a lot more RAM on my router,
making it useless.
TP-Link Archer C60v2, QCA9886, Openwrt Kernel 5.10.
Any idea what might have caused this?
Logs and screenshots bellow.
Regards,
Juliano
commit: 9fe1df7
commit: 8eca56d
`
commit: 9fe1df7
Sun Apr 25 13:44:41 2021 kern.info kernel: [ 19.793372] ath10k 5.10 driver, optimized for CT firmware, probing pci device: 0x56.
Sun Apr 25 13:44:41 2021 kern.info kernel: [ 19.817825] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
Sun Apr 25 13:44:41 2021 kern.info kernel: [ 19.824618] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
Sun Apr 25 13:44:41 2021 kern.warn kernel: [ 20.016975] ath10k_pci 0000:00:00.0: fwcfg key: dma_burst val: 0
Sun Apr 25 13:44:41 2021 kern.info kernel: [ 20.677102] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
Sun Apr 25 13:44:41 2021 kern.info kernel: [ 20.686635] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Sun Apr 25 13:44:41 2021 kern.info kernel: [ 20.705479] ath10k_pci 0000:00:00.0: firmware ver 10.4b-ct-9888-tH-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,no-bmiss-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 43aefc1c
Sun Apr 25 13:44:41 2021 kern.info kernel: [ 21.151221] ath10k_pci 0000:00:00.0: board_file api 2 bmi_id 0:20 crc32 5bb32c02
Sun Apr 25 13:44:41 2021 kern.warn kernel: [ 22.824196] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
Sun Apr 25 13:44:41 2021 kern.warn kernel: [ 22.832024] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32
Sun Apr 25 13:44:41 2021 kern.info kernel: [ 22.860965] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
Sun Apr 25 13:44:41 2021 kern.info kernel: [ 22.872267] ath10k_pci 0000:00:00.0: wmi print 'free: 151124 iram: 3988 sram: 56640'
Sun Apr 25 13:44:41 2021 kern.info kernel: [ 23.103972] ath10k_pci 0000:00:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
Sun Apr 25 14:53:53 2021 kern.warn kernel: [ 119.229748] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
Sun Apr 25 14:53:53 2021 kern.warn kernel: [ 119.237568] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32
Sun Apr 25 14:53:53 2021 kern.info kernel: [ 119.266498] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
Sun Apr 25 14:53:53 2021 kern.info kernel: [ 119.277834] ath10k_pci 0000:00:00.0: wmi print 'free: 151124 iram: 3988 sram: 56640'
Sun Apr 25 14:53:53 2021 kern.info kernel: [ 119.586056] ath10k_pci 0000:00:00.0: rts threshold -1
Sun Apr 25 14:53:53 2021 kern.warn kernel: [ 119.592165] ath10k_pci 0000:00:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
Sun Apr 25 14:53:54 2021 kern.info kernel: [ 120.228997] ath10k_pci 0000:00:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
Sun Apr 25 14:54:28 2021 kern.warn kernel: [ 154.338858] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
Sun Apr 25 14:54:28 2021 kern.warn kernel: [ 154.346635] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32
Sun Apr 25 14:54:28 2021 kern.info kernel: [ 154.375641] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
Sun Apr 25 14:54:28 2021 kern.info kernel: [ 154.386976] ath10k_pci 0000:00:00.0: wmi print 'free: 151124 iram: 3988 sram: 56640'
Sun Apr 25 14:54:28 2021 kern.info kernel: [ 154.694288] ath10k_pci 0000:00:00.0: rts threshold -1
Sun Apr 25 14:54:28 2021 kern.warn kernel: [ 154.700488] ath10k_pci 0000:00:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
Sun Apr 25 14:54:29 2021 daemon.notice netifd: Interface 'wwan' is enabled
commit: 8eca56d
Sun Apr 25 15:16:22 2021 kern.info kernel: [ 19.813262] ath10k 5.10 driver, optimized for CT firmware, probing pci device: 0x56.
Sun Apr 25 15:16:22 2021 kern.info kernel: [ 19.837855] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
Sun Apr 25 15:16:22 2021 kern.info kernel: [ 19.844626] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
Sun Apr 25 15:16:22 2021 kern.warn kernel: [ 20.050758] ath10k_pci 0000:00:00.0: fwcfg key: dma_burst val: 0
Sun Apr 25 15:16:22 2021 kern.info kernel: [ 20.696664] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
Sun Apr 25 15:16:22 2021 kern.info kernel: [ 20.706228] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Sun Apr 25 15:16:22 2021 kern.info kernel: [ 20.725065] ath10k_pci 0000:00:00.0: firmware ver 10.4b-ct-9888-tH-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,no-bmiss-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 43aefc1c
Sun Apr 25 15:16:22 2021 kern.info kernel: [ 21.172554] ath10k_pci 0000:00:00.0: board_file api 2 bmi_id 0:20 crc32 5bb32c02
Sun Apr 25 15:16:22 2021 kern.warn kernel: [ 22.846441] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
Sun Apr 25 15:16:22 2021 kern.warn kernel: [ 22.854228] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32
Sun Apr 25 15:16:22 2021 kern.info kernel: [ 22.883325] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
Sun Apr 25 15:16:22 2021 kern.info kernel: [ 22.894658] ath10k_pci 0000:00:00.0: wmi print 'free: 151124 iram: 3988 sram: 56640'
Sun Apr 25 15:16:22 2021 kern.info kernel: [ 23.027213] ath10k_pci 0000:00:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
Sun Apr 25 15:17:17 2021 kern.warn kernel: [ 83.651431] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
Sun Apr 25 15:17:17 2021 kern.warn kernel: [ 83.659243] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32
Sun Apr 25 15:17:17 2021 kern.info kernel: [ 83.688147] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
Sun Apr 25 15:17:17 2021 kern.info kernel: [ 83.699538] ath10k_pci 0000:00:00.0: wmi print 'free: 151124 iram: 3988 sram: 56640'
Sun Apr 25 15:17:17 2021 kern.info kernel: [ 84.007354] ath10k_pci 0000:00:00.0: rts threshold -1
Sun Apr 25 15:17:17 2021 kern.warn kernel: [ 84.013425] ath10k_pci 0000:00:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
Sun Apr 25 15:17:18 2021 daemon.notice netifd: Interface 'wwan' is enabled
`
Did you bisect to exactly this commit, or was this just the first time you noticed the problem?