This driver is designed to work for small USB thermal printers. Do not expect this to work for laser or inkjet printers because they require complex software support.
This has been tested with USB Host Shield Library 2.0 with one required patch and the ESC POS Printer library on a Uno.
https://github.com/felis/USB_Host_Shield_2.0
Required patch not merged yet
https://github.com/gdsports/ESC_POS_Printer
Sample program that prints "Hello Printer" in large letters.
#include "USBPrinter.h" // https://github.com/gdsports/USBPrinter_uhs2
#include "ESC_POS_Printer.h" // https://github.com/gdsports/ESC_POS_Printer
class PrinterOper : public USBPrinterAsyncOper
{
public:
uint8_t OnInit(USBPrinter *pPrinter);
};
uint8_t PrinterOper::OnInit(USBPrinter *pPrinter)
{
Serial.println(F("USB Printer OnInit"));
Serial.print(F("Bidirectional="));
Serial.println(pPrinter->isBidirectional());
return 0;
}
USB myusb;
PrinterOper AsyncOper;
USBPrinter uprinter(&myusb, &AsyncOper);
ESC_POS_Printer printer(&uprinter);
void setup() {
Serial.begin(115200);
while (!Serial && millis() < 3000) delay(1);
if (myusb.Init()) {
Serial.println(F("USB host failed to initialize"));
while (1) delay(1);
}
Serial.println(F("USB Host init OK"));
}
void loop() {
myusb.Task();
// Make sure USB printer found and ready
if (uprinter.isReady()) {
printer.begin();
Serial.println(F("Init ESC POS printer"));
printer.setSize('L'); // L for large
printer.println(F("Hello Printer"));
printer.feed(2);
// Do this one time to avoid wasting paper
while (1) delay(1);
}
}
The ESC POS library send printer ESC/POS commands for different font sizes, graphics mode, etc. It is based on the Adafruit Thermal printer library but modified to work with USB thermal receipt printers. Note different thermal printers from even if from the same manufacturers implement different subsets of the ESC POS commands. You will have to find the ones that work on your printer.
The following driver works on SAMD board with USB OTG ports such as Arduino Zero and MKR family.
https://github.com/gdsports/USBPrinter_uhls
The following driver works on Teensy 3.6 boards.