Giters
elephantrobotics
/
pymycobot
This is a python API for ElephantRobotics product.
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
102
Watchers:
6
Issues:
34
Forks:
52
elephantrobotics/pymycobot Issues
pymycobot::get_angles may fail depending on current angle condition
Updated
7 months ago
Comments count
10
get_angles return empty
Updated
7 months ago
Comments count
11
Setting Up WiFi using myCobot 280 M5
Closed
9 months ago
Comments count
1
get_angles always returns a fixed value
Updated
9 months ago
Comments count
1
MyCobot 280 M5, is_power_on() return -1. None API works
Closed
9 months ago
Comments count
1
Ubuntu not reading or writing commands (Not supported)
Closed
a year ago
Comments count
1
Fresh Ubuntu 20 installation in RPi can't communicate with Atom
Closed
2 years ago
Comments count
3
Format for Sending and Receiving Command Frames not correct
Closed
2 years ago
Comments count
2
Connect with MyCobotPro 320 M5 via Ethernet
Updated
2 years ago
Comments count
1
Debugging
Closed
2 years ago
Comments count
1
version() returns an empty list
Closed
2 years ago
Comments count
1
pip install with python2.7 faild
Closed
3 years ago
Comments count
1
get_encoders() returns empty array
Closed
3 years ago
Comments count
12
jog_coord not work
Closed
3 years ago
Comments count
2
Unnecessary fix for is_servo_enable() in v2.5.8
Closed
3 years ago
Comments count
3
get_encoder() should return one scalar value
Closed
3 years ago
Comments count
1
Gripper does not keep closed
Closed
3 years ago
Comments count
2
Real-Time Synchronization of movement
Closed
3 years ago
Comments count
6
read_angles: Off by a factor of 6?
Closed
3 years ago
Comments count
3
Is is it possible to write images to the Basic screen?
Closed
3 years ago
Comments count
2
dh parameters
Closed
3 years ago
Comments count
5
The mycobot adaptive gripper is always closed and gets stuck with set_gripper_value()
Closed
3 years ago
Comments count
9
get_joint_[min|max]_value() returns wrong value for all joints
Closed
3 years ago
Comments count
5
pwm cannot set Hz
Closed
3 years ago
Comments count
5
unnecessary debug print
Closed
3 years ago
Comments count
1
Python process dies when calling get_radians()
Closed
3 years ago
Comments count
6
pymycobot on windows
Closed
3 years ago
Comments count
1
is_moving method always return 1 even if it's not actually moving
Closed
3 years ago
Comments count
1
该函数缺少一个结束祯 0xfa
Closed
3 years ago
Comments count
1