This is a host application for browserpass browser extension providing it access to your password store. The communication is handled through Native Messaging API.
The following operating systems provide a browserpass package that can be installed using a package manager:
- Arch Linux: browserpass
- Gentoo Linux: browserpass
- Debian sid: webext-browserpass
- openSUSE Tumbleweed: browserpass-native
- NixOS: browserpass - also read Install on Nix / NixOS
- macOS: browserpass in a user-contributed tap amar1729/formulae
Once the package is installed, refer to the section Configure browsers.
If your OS is not listed above, proceed with the manual installation steps below.
Download the latest Github release, choose either the source code archive (if you want to compile the app yourself) or an archive for your operating system (it contains a pre-built binary).
All release files are signed with a PGP key that is available on maximbaz.com, keybase.io and various OpenPGP key servers. First, import the public key using any of these commands:
$ curl https://maximbaz.com/pgp_keys.asc | gpg --import
$ curl https://keybase.io/maximbaz/pgp_keys.asc | gpg --import
$ gpg --recv-keys EB4F9E5A60D32232BB52150C12C87A28FEAC6B20
To verify the signature of a given file, use $ gpg --verify <file>.asc
.
It should report:
gpg: Signature made ...
gpg: using RSA key 8053EB88879A68CB4873D32B011FDC52DA839335
gpg: Good signature from "Maxim Baz <...>"
gpg: aka ...
Primary key fingerprint: EB4F 9E5A 60D3 2232 BB52 150C 12C8 7A28 FEAC 6B20
Subkey fingerprint: 8053 EB88 879A 68CB 4873 D32B 011F DC52 DA83 9335
Unpack the archive. If you decided to compile the application yourself, refer to the Building the app section on how to do so. Once complete, continue with the steps below.
If you are on macOS, first install the necessary tools: brew install coreutils gnu-sed
.
If you are on FreeBSD, first install the GNU tools: pkg install coreutils gmake gsed'.
Use gmake
in place of make
below.
If you downloaded a release archive with pre-compiled binary, follow these steps to install the app:
# IMPORTANT: replace XXXX with OS name depending on the archive you downloaded, e.g. "linux64"
make BIN=browserpass-XXXX configure # Configure the hosts json files
sudo make BIN=browserpass-XXXX install # Install the app
In addition, both configure
and install
targets respect PREFIX
, DESTDIR
parameters if you want to customize the install location (e.g. to install to a $HOME
dir to avoid using sudo
).
For example, if you are on macOS or FreeBSD, you probably want to install Browserpass in /usr/local/bin
, therefore you need to run:
make BIN=browserpass-darwin64 PREFIX=/usr/local configure # Configure the hosts json files
sudo make BIN=browserpass-darwin64 PREFIX=/usr/local install # Install the app
If you compiled the app yourself, you can omit BIN
parameter:
make configure # Configure the hosts json files
sudo make install # Install the app
Finally proceed to the Configure browsers section.
For a declarative NixOS installation, update your channel with sudo nix-channel --update
, use the following to your /etc/nixos/configuration.nix
and rebuild your system:
{ pkgs, ... }: {
programs.browserpass.enable = true;
environment.systemPackages = with pkgs; [
# All of these browsers will work
chromium firefox google-chrome vivaldi
# firefox*-bin versions do *not* work with this. If you require such Firefox versions, use the stateful setup described below.
];
}
For a stateful Nix setup, update your channel, install Browserpass and link the necessary files with the Makefile (see Configure browsers section), but pass DESTDIR=~/.nix-profile
:
$ nix-channel --update
$ nix-env -iA nixpkgs.browserpass # Or nix-env -iA nixos.browserpass on NixOS
$ DESTDIR=~/.nix-profile make -f ~/.nix-profile/lib/browserpass/Makefile <desired make goal>
Download the latest Github release for windows64
.
Run the installer, it will install all the necessary files in C:\Program Files\Browserpass
and it will also configure browsers.
If you want to use WSL instead
- Follow the installation steps for the WSL distribution you are using. There is no need to configure the browser as your browser does not run in WSL.
- Follow the then installation steps for installing on Windows.
- Create
C:\Program Files\Browserpass\browserpass-wsl.bat
with the following contents:
@echo off
bash -c "/usr/bin/browserpass-linux64 2>/dev/null"
- Edit the hosts json files (in our example
C:\Program Files\Browserpass\browser-files\*-host.json
) and replacebrowserpass-windows64.exe
withbrowserpass-wsl.bat
you've just created.
Remember to check Hints for configuring gpg on how to configure pinentry to unlock your PGP key.
The following operating systems provide packages for certain browsers that can be installed using a package manager:
- Arch Linux: browserpass-chromium and browserpass-firefox
- AUR: browserpass-chrome
If you installed a distro package above, you are done!
If something went wrong, if there's no package for your OS and/or a browser of your choice, or for whatever reason you just don't want to use them, proceed with the steps below.
First, enter the directory with installed Browserpass, by default it is /usr/lib/browserpass/
, but if you used PREFIX
or DESTDIR
when running make install
, it might be different for you. For example, on macOS the directory is likely to be /usr/local/lib/browserpass/
.
See below the list of available make
goals to configure various browsers. Use gmake
on FreeBSD in place of make
.
It is recommended to use *-user
make goals, as more people had luck with them. But if they don't work as expected, try other available goals.
If you provided PREFIX
and/or DESTDIR
while running make install
, remember that you must provide the same parameters, for example make PREFIX=/usr/local hosts-chromium-user
:
Command | Description |
---|---|
make hosts-chromium-user |
Configure browserpass for Chromium browser, for the current user only |
make hosts-firefox-user |
Configure browserpass for Firefox browser, for the current user only |
make hosts-chrome-user |
Configure browserpass for Google Chrome or Opera browsers, for the current user only |
make hosts-brave-user |
Configure browserpass for Brave browser, for the current user only |
make hosts-iridium-user |
Configure browserpass for Iridium browser, for the current user only |
make hosts-vivaldi-user |
Configure browserpass for Vivaldi browser, for the current user only |
make hosts-slimjet-user |
Configure browserpass for Slimjet browser, for the current user only |
sudo make hosts-chromium |
Configure browserpass for Chromium browser, system-wide |
sudo make hosts-firefox |
Configure browserpass for Firefox browser, system-wide |
sudo make hosts-chrome |
Configure browserpass for Google Chrome or Opera browsers, system-wide |
sudo make hosts-brave |
Configure browserpass for Brave browser, system-wide |
sudo make hosts-iridium |
Configure browserpass for Iridium browser, system-wide |
sudo make hosts-vivaldi |
Configure browserpass for Vivaldi browser, system-wide |
sudo make hosts-slimjet |
Configure browserpass for Slimjet browser, system-wide |
In addition, Chromium-based browsers support the following make
goals:
Command | Description |
---|---|
make policies-chromium-user |
Automatically install browser extension from Web Store for Chromium browser, for the current user only |
make policies-chrome-user |
Automatically install browser extension from Web Store for Google Chrome browser, for the current user only |
make policies-brave-user |
Automatically install browser extension from Web Store for Brave browser, for the current user only |
make policies-iridium-user |
Automatically install browser extension from Web Store for Iridium browser, for the current user only |
make policies-slimjet-user |
Automatically install browser extension from Web Store for Slimjet browser, for the current user only |
make policies-vivaldi-user |
Automatically install browser extension from Web Store for Vivaldi browser, for the current user only |
sudo make policies-chromium |
Automatically install browser extension from Web Store for Chromium browser, system-wide |
sudo make policies-chrome |
Automatically install browser extension from Web Store for Google Chrome browser, system-wide |
sudo make policies-brave |
Automatically install browser extension from Web Store for Brave browser, system-wide |
sudo make policies-iridium |
Automatically install browser extension from Web Store for Iridium browser, system-wide |
sudo make policies-slimjet |
Automatically install browser extension from Web Store for Slimjet browser, system-wide |
sudo make policies-vivaldi |
Automatically install browser extension from Web Store for Vivaldi browser, system-wide |
Make sure you have the latest stable Go installed.
The following make
goals are available (check Makefile for more details):
Command | Description |
---|---|
make or make all |
Compile the app and run tests |
make browserpass |
Compile the app for your OS |
make browserpass-linux64 |
Compile the app for Linux 64-bit |
make browserpass-windows64 |
Compile the app for Windows 64-bit |
make browserpass-darwin64 |
Compile the app for Mac OS X 64-bit |
make browserpass-openbsd64 |
Compile the app for OpenBSD 64-bit |
make browserpass-freebsd64 |
Compile the app for FreeBSD 64-bit |
make test |
Run tests |
First build the docker image using the following command in the project root:
docker build -t browserpass-native .
The entry point in the docker image is the make
command. To run it:
docker run --rm -v "$(pwd)":/src browserpass-native
Specify make
goal(s) as the last parameter, for example:
docker run --rm -v "$(pwd)":/src browserpass-native test
Refer to the list of available make
goals above.
If you installed the app using a package manager for your OS, you will likely update it in the same way.
If you installed manually, repeat the steps in the Install manually section.
If you can see passwords, but unable to fill forms or copy credentials, you likely have issues with your gpg
setup.
First things first, make sure that gpg
and some GUI pinentry
are installed.
- on macOS many people succeeded with
pinentry-mac
- on Linux users report that
pinentry-gnome3
does not work well with GNOME 3 and Firefox, use e.g.pinentry-gtk-2
- on Windows WSL people succeded with pinentry-wsl-ps1
pinentry
is the application that asks you your password to unlock PGP key when you for example use pass
.
The selected pinentry
must have GUI, console-based (like pinentry-tty
or pinentry-curses
) are not supported (unless you know what you are doing).
Ensure that gpg-agent
process is actually running, if not you need to investigate how to enable it.
Finally configure a GUI pinentry program in ~/.gnupg/gpg-agent.conf
:
pinentry-program /full/path/to/pinentry
You will need to restart gpg-agent
using: $ gpgconf --kill gpg-agent
If Browserpass is unable to locate the proper gpg
binary, try configuring a full path to your gpg
in the browser extension settings or in .browserpass.json
file in the root of your password store:
{
"gpgPath": "/full/path/to/gpg"
}
If you installed Browserpass via a package manager, uninstalling the package will hopefully do all the necessary cleanup.
For manual installations, uninstallation procedure basically consists of following the steps you ran in Makefile in reverse.
- Fork the repo
- Create your feature branch
git checkout -b my-new-feature
- Commit your changes
git commit -am 'Add some feature'
- Push the branch
git push origin my-new-feature
- Create a new pull request