pinentry-wsl-ps1

GUI for GPG within Windows WSL for passwords, pins, etc.
Optional persistence of passwords into Windows Credential Manager

Features

Allows GnuPG to prompt and read passphrases by the pinentry protocol with a GUI when running within WSL (Windows Subsystem for Linux)
Works for all keys managed by gpg-agent (GPG, SSH, etc)
Drop-in replacement GUI to pinentry-curses, pinentry-gtk-2, etc.
Works well with WSLgit. Enables your Git and GPG configuration/processing in WSL while access/using it from Windows apps like VS Code. Easy-breezy GPG signing of Git commits. 🙂📝

Requirements

Windows 10 Fall Creators Update (build 16299) or newer. You can check the version by winver.exe
WSL with Ubuntu 16.04 or newer. You can check the release version by cat /etc/lsb-release
GPG v2.1.11 or later. Earlier versions of 2.x (aka GPG2) or 1.x (aka GPG) have not been tested and are not recommended. You can check the version by gpg2 --version

Setup

Save the pinentry-wsl-ps1.sh script and set its permissions to be readable and executable, e.g.
chmod ug=rx pinentry-wsl-ps1.sh
Configure gpg-agent to use this script for pinentry using one of the following methods
1. Set pinentry-program within ~/.gnupg/gpg-agent.conf to the script's path, e.g.
  pinentry-program /mnt/c/repos/pinentry-wsl-ps1/pinentry-wsl-ps1.sh
2. Or, set the path to this script when you launch gpg-agent, e.g.
  gpg-agent --pinentry-program /mnt/c/repos/pinentry-wsl-ps1/pinentry-wsl-ps1.sh
Optionally enable persistence of passwords.
1. Follow instructions https://github.com/davotronic5000/PowerShell_Credential_Manager to install the needed module from the Powershell Gallery or GitHub.
2. Note security perspectives like https://security.stackexchange.com/questions/119765/how-secure-is-the-windows-credential-manager
3. Edit the script and near the beginning of the file set PERSISTENCE to one of the values:
  - "" no persistence
  - "Session" persists the password only for the current Windows login session
  - "LocalMachine" persists the password for the current Windows login on the local Windows computer
  - "Enterprise" persists the password for the current Windows login and requests Windows Credential Manager to synchronize it across Windows computers for that same Windows login
Optionally disable toast notification of password retrieval from Credential Manager. By default, this code notifies you with a toast notification every time gpg-agent retrieves a password from the Windows Credential Manager. Gpg-agent caches passwords by default (see gpg-agent settings like max-cache-ttl) so you may not see the notification with every usage.
- Disable: edit the script, near the top, set NOTIFY to the value "0"
- Enable: edit the script, near the top, set NOTIFY to the value "1"

Troubleshooting Ideas

Run gpg2 --version and gpg-agent --version. If you don't have version 2.1.11 or newer for both versions, you may have unknown problems.
I recommend you have a fully working GPG2 and GPG-agent setup using the default GPG2 configuration. Try two tests. If these both don't work, you first need to troubleshoot your install.
1. gpg2 --clearsign myfile.zip. Your entire console window should clear and present you an isolated password entry field in a crudely drawn box. Type in your key's password and it should return to your normal console with no error. You should now have the newly signed myfile.zip.asc file.
2. If you are using the SSH-compatibility feature of GPG-agent, ensure you are not running ssh-agent. Try ssh-add ... to add your SSH key for your favorite host. Then remove and stash in a protected location this ssh key file from your ~/.ssh directory to ensure ssh isn't using that file instead of the agent. Now try to ssh to this host. It should automatically retrieve the private host key from gpg-agent.
I discovered that there are many ways for gpg-agent to be started silently. The options passed to it are inconsistent across the methods (and across gpg versions). On my computer, I explicitly start gpg-agent. Below is the method I use in my .profile. Please be aware that .profile is not always run for all *nix shell scenarios and .bashrc may be better for your setup. The details on this are written in the BASH man page in the INVOCATION section.
Configuration of GPG can become complicated if you diverge from what the GPG team considers a standard setup. You may need to read the official GPG documentation to configure it for your specific computer setup.
GIT uses gpg by default. To instruct GIT to use gpg2, you can easily configure it with git config --global gpg.program gpg2
Enable a gpg-agent log file. Edit your ~/.gnupg/gpg-agent.conf file and insert the following lines. Your user must have permission to write to this file path. Restart gpg-agent after you save this configuration.
```
debug 1024
debug-pinentry
log-file /home/username/agent.log 
```
Enable a log file specific to this pinentry code. Edit the script, near the top, set DEBUGLOG to a file path, e.g. "$HOME/pintrace.log". Your user must have permission to write to this file path. Restart gpg-agent after you save this configuration.

Example configuration files

Below are some examples from my configuration files. If you have a working GPG2 and gpg-agent setup, the only config change likely needed is the pinentry-program line from setup step 2.

Part of my ~/.profile

if [ -z "$(pgrep gpg-agent)" ]; then
    gpgconf --launch gpg-agent
    # I use the above method because the following method
    # doesn't set GPG_AGENT_INFO or GPG_TTY and has a bug
    # setting SSH_AUTH_SOCK if you use socket redirection:
    #   eval $(gpg-agent --homedir $HOME/.gnupg --daemon) 
fi
if [ -z "$(pgrep dirmngr)" ]; then
    dirmngr --homedir $HOME/.gnupg --daemon >/dev/null 2>&1
    # I use the above method to consistently set vars in .bashrc
    # rather than the following:
    #   eval $(dirmngr --homedir $HOME/.gnupg --daemon) 
fi

Part of my ~/.bashrc

export GPGKEY=12345678 # set prefered gpg signing key
PIDFOUND=$(pgrep gpg-agent)
if [ -n "$PIDFOUND" ]; then
    export GPG_AGENT_INFO="$HOME/.gnupg/S.gpg-agent:$PIDFOUND:1"
    export GPG_TTY=$(tty)
    export SSH_AUTH_SOCK="$HOME/.gnupg/S.gpg-agent.ssh"
    unset SSH_AGENT_PID
fi
PIDFOUND=$(pgrep dirmngr)
if [ -n "$PIDFOUND" ]; then
    export DIRMNGR_INFO="$HOME/.gnupg/S.dirmngr:$PIDFOUND:1"
fi
unset PIDFOUND

My ~/.gnupg/gpg-agent.conf

enable-ssh-support
disable-scdaemon
pinentry-program /mnt/c/repos/pinentry-wsl-ps1/pinentry-wsl-ps1.sh

diablodale / pinentry-wsl-ps1