cta-observatory / ctapipe_io_lst

ctapipe IO plugin for LST prototype data

cta-observatory/ctapipe_io_lst Issues

`event_type` set to unknown (255) with `ctapipe v0.20.0`
Closed 7 months ago4
Problems reprocessing 2021-02-13, since "case of broken pixels not contained in waveform is not implemented"
Closed 7 months ago5
How to deal with drs4 baseline and spike correction in case of EVB pre-calibrated data
Updated 7 months ago3
DRS4 baseline creation script fails with ctapipe io lst 0.22.2 and EVB5 data
Closed 7 months ago1
pkg_resources is deprecated
Closed 7 months ago1
Support for pre-calibrated data
Updated 9 months ago
Support for reading EVBv6 files
Updated a year ago3
pixel order inconsistent in filled containers
Updated a year ago1
Data type of tib packet is incorrect
Closed a year ago3
Add flag to set gain selection of calibration events
Updated a year ago
Value of clock counter frequency is slightly off
Updated a year ago
Support for volume-reduced data (event-wise pixel selection)
Closed a year ago4
interpolation of spike A slices close to the edge of ROI
Closed a year ago3
Do not reuse event container in source
Updated a year ago
processing of pixel_status?
Closed a year ago2
remove reliance on hard-coded n_gains, n_pixels, n_samples, use info from camera configuration
Updated a year ago
Files without Events table
Closed a year ago4
Properly tag pedestal events before July 2020
Closed a year ago11
fits file is not closed in is_compatible
Closed a year ago1
Editable installation broken with new setuptools version
Closed 2 years ago
Add repository to Zenodo
Closed 2 years ago
Better definition of timestamp based on EVB run start
Updated 2 years ago5
Switch to using UCTS timestamp?
Updated 2 years ago5
DRS4 delta T correction for the LST2 camera
Updated 2 years ago6
Do not treat `(dragon_timestamp - ucts_timestamp) > 1e3` as jump
Closed 3 years ago3
spike correction should be ADC subtraction instead of the interpolation
Closed 3 years ago2
Check if events already flagged as FF fulfill the condition in the heuristic method
Closed 3 years ago6
Directly fill `event.lst.tel[X].first_capacitor_id` with the correct array
Updated 3 years ago2
`MultiFile.rewind` is broken
Closed 3 years ago
MultiFile does not check if files belong to the same run
Closed 3 years ago
Error handling for missing information in a drive log file
Closed 3 years ago4
Only apply correction algorithms / gain selection if not yet applied by EVB
Updated 3 years ago3
Flatfield tagging misses some flatfield events
Closed 3 years ago2
Negative values in R0 data frame during the pedestal calculation
Updated 3 years ago4
Empirical calibration correction, re-locate?
Updated 3 years ago10
Use `CameraEvent.trigger_time_s` and `CameraEvent.trigger_time_qns` when info from UCTS in the raw files is reliable
Updated 3 years ago6
CDTS info has wrong dtypes
Closed 3 years ago2
Support for data taken with switched off modules
Closed 3 years ago7
Update protozfitsreader?
Closed 3 years ago4
Version issue
Closed 3 years ago7
Perform gain selection inside of the event source
Closed 3 years ago4
Behaviour for missing UCTS and/or TIB
Closed 3 years ago16
Read LST data ValueError: Timestamp
Closed 3 years ago1
Fill `event.trigger.time` field
Closed 3 years ago4
Apply R0 → DL0 calibration in event source
Closed 3 years ago3
Using native byte order for loading binary data is wrong
Closed 4 years ago1
event_source does not actually read the latest camera geometry ?
Closed 4 years ago12
Update protozfitsreader?
Closed 4 years ago1
EventSource.subarray must be a property
Closed 4 years ago2
use ctapipe.core.provenance to track open files
Updated 4 years ago