Pioneer_Model

Slightly further adjusted Pioneer 3-DX model forked from https://github.com/SD-Robot-Vision/PioneerModel that itself was a slightly adjusted pioneer model that was obtained from https://github.com/RafBerkvens/ua_ros_p3dx

Quick Description

From prior README.md file: "A ROS/Gazebo Pioneer 3DX model."

Package Dependencies

To run this successfully, we require:

ROS Kinetic and Gazebo 5+

Specific dependencies:

PioneerModel/p3dx_control requires controller_manager to compile (controller_manager_tests auto-installs this)
gazebo_ros_pkgs is needed to provide the necessary interfaces to integrate simulated robots with ROS
- gazebo_ros_control is a subpackage of this that provides some basic controllers / control interfaces (plugins) that simulated robots can use
gazebo_ros_control needs transmission_interface from ros_control

To install ROS kinetic and set up a catkin workspace, try:

git clone https://github.com/AS4SR/vagrant-rss.git
./vagrant-rss/single_installers/quick_install_ros_gazebo_and_catkin_ws.sh kinetic $USER

Install additional ROS kinetic dependencies:

$ sudo apt-get install ros-kinetic-controller-manager-tests ros-kinetic-ros-controllers
$ sudo apt-get install ros-kinetic-gazebo-ros-pkgs ros-kinetic-ros-control

Optional installation, if you want to test keyboard control:

$ cd <catkin_ws>/src
$ git clone https://github.com/SD-Robot-Vision/p3dx_mover.git
$ cd ..
$ catkin_make

Compilation for Use

To download and compile this github repository (assuming you've already installed ros-kinetic-desktop-full but don't have a catkin workspace set up yet):

$ mkdir -p <catkin_ws>/src
$ cd <catkin_ws>/src
$ git clone https://github.com/cmcghan/PioneerModel.git
$ cd ..
$ catkin_make

...Alternately, to install this github repository for rss-rse use:

$ mkdkir -p <catkin_ws>/src/rss-rse/extern
$ cd <catkin_ws>/src/rss-rse/extern
$ git clone https://github.com/cmcghan/PioneerModel.git
$ cd ../../..
$ catkin_make

NOTE:

As of 2017-06-21, updates have been made to make these packages work properly with the newer versions of Gazebo (5+) and ros-kinetic-xacro that may break compatibility with older versions of ROS and Gazebo. However, if you'd still like to try using this package with an older version of ROS, you can try the following:

For ROS indigo:

$ cd <catkin_ws>/src
$ sudo apt-get install ros-indigo-controller-manager-tests ros-indigo-ros-controllers
$ sudo apt-get install ros-indigo-gazebo-ros-control

For ROS jade:

$ sudo apt-get install ros-jade-controller-manager-tests ros-jade-ros-controllers
$ sudo apt-get install ros-jade-gazebo-ros-pkgs ros-jade-ros-control

Testing

Try running the 0$ and 1$ commands here in separate terminals:

0$ roscore
1$ roslaunch p3dx_gazebo_mod gazebo.launch

to show the p3dx rover in a Willow Garage setting.

If you also installed the optional keyboard controller, try running this in a third terminal:

2$ rosrun p3dx_mover mover.py

then use the arrow keys to control the robot motion, 'q' to quit.

References:
http://wiki.lofarolabs.com/index.php/Moving_The_Pioneer_3-DX_In_Gazebo

License

Original license is GPLv3, see LICENSE file in the repository.

Modifications were performed by Catharine McGhan.

Modifications include:

updating README.md file
changing the package names in all subdirectories to *_mod (for compatibility in case original branch is downloaded)
removing .project and meow.txt files
fixing internal naming inside robot model (base_link_wheel_joint instead of base_wheel_joint)
adding element to element inside robot model
adding default parameters for DiffDrive
exposing (x,y,z,R,P,Y) parameters (starting position and orientation of p3dx rover) in gazebo.launch
fixing a typo in the urdf_spawner call in the gazebo.launch file (" was in the wrong place)
fixes to other internals to remove error messages (legacyMode and leftJoint rightJoint in gazebo.launch; odometrySource)
updates to support and use the newer xacro -i (with "inorder" processing mode) instead of deprecated xacro.py
material-color-fix (removal of 'name=' property from all 'visual' tags)
changes to directory names to make them match the package names in CMakeLists.txt and package.xml
updates to README.md
updates to maintainer email addresses in package.xml files

References:
http://answers.ros.org/question/186681/no-valid-hardware-interface-element-found-in-joint/
http://answers.ros.org/question/40627/how-do-i-set-the-inital-pose-of-a-robot-in-gazebo/
http://gazebosim.org/tutorials/?tut=ros_roslaunch http://docs.ros.org/kinetic/api/gazebo_plugins/html/gazebo__ros__diff__drive_8cpp_source.html http://wiki.ros.org/diff_drive_controller http://wiki.ros.org/xacro#Processing_Order https://bitbucket.org/osrf/sdformat/issues/132/parser-does-not-handle-urdf-material

Contact

If you have any questions regarding the contents of this repository, please email Catharine McGhan at cat.mcghan@uc.edu.

-EOF-

cmcghan / PioneerModel