bastard-GIT

tqdm

:zap: A Fast, Extensible Progress Bar for Python and CLI

Tasmota

Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at

zigbee2mqtt

Zigbee 🐝 to MQTT bridge 🌉, get rid of your proprietary Zigbee bridges 🔨

esphome

ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.

alive-progress

A new kind of Progress Bar, with real-time throughput, ETA, and very cool animations!

WireViz

Easily document cables and wiring harnesses.

hassio-zigbee2mqtt

Official Zigbee2MQTT Home Assistant add-on

kicad-libraries

KiCad libraries for Espressif SoCs, modules, and DevKits.

xknx

XKNX - A KNX library written in Python

Home-AssistantConfig

🏠 My Home Assistant config & docs (Hass.io based). Be sure to 🌟 this repository for updates!

homeassistant-addons

wt32-eth01

Bits and bobs related to Wireless-Tag's WT32-ETH01 board

xknxproject

ETS project parser written in python

logic_analyzer

Logic analyzer on ESP32 for self-diagnostics

knx-frontend

Home Assistant Panel for managing the KNX integration

hagruenbeck_cloud

Home Assistant integration for Grünbeck Cloud based Water softeners

ha-stiebel-control

An ESPhome / Home Assistant configuration to monitor & configure Stiebel Eltron Heating Pumps via a CAN Interface

StiebelEltron-heatpump-over-esphome-can-bus

ESPhome-configuration to read and write values on a Stiebel Eltron heat pump

OneESP32ToRuleThemAll

lwz180

Adapter for Stiebel Eltron LWZ 180 control unit interface

goelster

Go interface for Elster CAN devices

node-red

esp-idf-can2socket

CANbus to BSD-Socket bridge using esp32

python_gruenbeck_cloud

stiebel_can_bus_extension

Extension of the Steibel Eltron Can Bus of heat pumps with an ESP32 interface for integration into the Smart Home.

heat-pump-api

This project aims to provide a uniform abstraction layer for heat pumps.

StiebelEltron-heatpump-over-esphome-can-bus

Fork of ESPhome-configuration to read and write values on a Stiebel Eltron heat pump

ha-stiebel-control

An ESPhome / Home Assistant configuration to monitor & configure Stiebel Eltron Heating Pumps via a CAN Interface