XKNX / xknx

XKNX - A KNX library written in Python

http://xknx.io/

XKNX/xknx Issues

impossible to get info with DPT 13.10 DPT 235.1
Closed 3 months ago21
OverflowErrors on secure timer
Closed 2 months ago6
Hello, I encountered some issues while using homeassisant regarding my DALI dual color temperature bulb.
Updated 3 months ago6
Climate operation mode set to Sleep after HA restart
Closed 3 months ago8
Feature Request : Integration of DPT 235.001 / DPT_Tariff_ActiveEnergy
Closed 6 months ago18
Connection problem to the IP router (PeakNx Micro)
Closed 3 months ago2
Unify DPT definitions
Updated 4 months ago
DPT 7.* and 8.* should consider resolution
Closed 5 months ago
FeatureRequest: HVACStatus not handle Heat/Cool bit
Closed 5 months ago1
Make devices re-attachable
Closed 5 months ago2
Feature Request: Improve generic DPT handling
Closed 6 months ago1
KNX.send DPT 20.102
Closed 8 months ago1
DPT decoding
Closed 9 months ago3
Feature Request: Add custom preflight for enable tunneling
Closed a year ago5
Can not Connect
Closed a year ago3
Group values sent with delay are received at the same time
Closed a year ago2
Feature request: DPT2.001, 2 bit force option for lights (and if applicable maybe other stuff with a more generalized approach)
Closed a year ago4
Error: KNX bus did not respond in time (2.0 secs) to GroupValueRead
Closed a year ago5
Home Assistant illuminance sensor shows absolutely wrong values (thousands of lux)
Closed a year ago2
Light: last used mode
Closed 2 years ago1
Feature Request: Cover travel state, travel direction and position while moving from bus instead of travel calculator
Updated 2 years ago3
Feature Request: Setpoint differently implemented on T2plus from 2007
Updated 2 years ago5
2.6.0 filters telegrams from KNX gateway/tunnel device itself
Closed 2 years ago2
KNX entities switch from available to unavailable randomly
Closed 2 years ago18
Non-standardised DP type explanation
Closed 2 years ago1
Getting the state via callback for BinarySensor
Closed 2 years ago2
Toggle between target_temperature_state_address and target_temperature_address
Closed 2 years ago10
Unhandled management telegram warnings in HA log
Closed 2 years ago1
Feature Request: Support for KNXnet/IP Device Management Connection
Closed 2 years ago5
Cover update callback stops in some special case
Closed 2 years ago8
HA device class CURRENT missing
Closed 2 years ago1
'TunnellingRequest with sequence number not equal to expected' error every few hours
Closed 2 years ago10
Missing DPT 9.009 Value Air Flow
Closed 2 years ago3
System telegrams are not properly processed
Closed 2 years ago8
Optimize for Python 3.11 adaptive interpreter
Updated 2 years ago1
Get correct password from keyfile with multiple interfaces
Closed 2 years ago
A_ADC_Response-PDU or A_SystemNetworkParameter_* not parsed correctly
Updated 2 years ago1
Failed to parse knxkeys file (latency not found)
Closed 2 years ago5
Separate discovery multicast group from routing group
Closed 2 years ago
Climate temperature change issues
Closed 2 years ago8
KNX number platform reads value from bus without state_address configured
Closed 2 years ago2
Several xknx daemons
Closed 2 years ago4
Feature request: Add control data type of VRV air conditioner
Closed 2 years ago7
always_callback does not trigger a state update within homeassistant
Closed 2 years ago9
AttributeError: 'Keyring' object has no attribute 'backbone'
Closed 2 years ago1
Minimum hardware for KNX
Closed 2 years ago7
Feature request: Support `device_class` for switches in HA integration
Closed 3 years ago1
How to monitor telegram from knx IP Router for long time
Closed 3 years ago8
How to use xknx in Windows or in a VM
Closed 3 years ago6
Special characters not rendered correctly since HA 2022.4
Closed 3 years ago4