Nonlinear transmission manufacturing
avikde opened this issue · comments
Related to #88 (comment)
- cure 1 stack A cut files
- cure 1 stack B cut files
- cure 1 stack A cutting
- cure 1 stack B cutting
- cure 1 heat press
- cure 2 top cut files
- cure 2 middle cut files
- cure 2 press
- release cut files
Notes are in onenote
Release cut not done - doubts about if it will cause problems
Old files
New files - release doubts
Layers:
- YMY 107um
- YSH 80um -> 19.5A, 60%, 40p
- M55J? 175um -> 19.5A, 60%, 160p
- KA -> 5
- AD -> 3
Bottom lip 1.0593mm - my pasting was wrong
PROBLEM WITH dxf appearing as blank in ProLase:
- open with DraftSight, select the cut features, modify -> explode twice.
- when selected, they should say the correct layer name
stackup design for l1
https://docs.google.com/spreadsheets/d/1YXm9ZMnkWe7W_Ez_9_BI8hHQUhF09xiKaWZCyYhOSMs/edit
Manufacturing complete!
