Xinyuan-LilyGO / T-CAN485

Xinyuan-LilyGO/T-CAN485 Issues

Request: Docs/silkscreen for power connection noting GND/-ve is on the board edge
Updated 3 months ago2
Unusual voltage levels on RS485
Updated 3 months ago4
Expected usage of the bus GND pins?
Updated 3 months ago1
How to change IER parameter of CAN controller?
Updated 4 months ago1
TF Card Read/Write Documentation
Closed 4 months ago1
missing documentation wifi connector
Updated 4 months ago2
RS485 ESPHome connect issue
Updated 5 months ago4
Problem with uploading application when inputs/outputs are connected
Updated 8 months ago
Modbus, ESPHome, ESP-IDF and MQTT
Closed 9 months ago
CAN bus continuously publishes and blocks the programme
Updated a year ago3
Error in config.h from can.ino example
Updated 2 years ago
RS485 pin layout unclear + antennae interface
Closed 2 years ago1
[CAN] Example for Arduino not working
Closed 2 years ago1
USB Type-C Connection didn't see from Arduino-IDE Ports
Closed 2 years ago1
Tutorial
Closed 2 years ago1
Arduino IDE set up
Closed 2 years ago12
modbus rs485/can to mqtt software on T-CAN485
Closed 2 years ago
Documentation: Wrong URL in README.md for Arduino Board install
Closed 2 years ago5