TNO MPC Lab - Protocols - Secure Comparison

The TNO MPC lab consists of generic software components, procedures, and functionalities developed and maintained on a regular basis to facilitate and aid in the development of MPC solutions. The lab is a cross-project initiative allowing us to integrate and reuse previously developed MPC functionalities to boost the development of new protocols and solutions.

The package tno.mpc.protocols.secure_comparison is part of the TNO Python Toolbox.

Remark: This cryptography software may not be used in applications that violate international export control legislations.
This implementation of cryptographic software has not been audited. Use at your own risk.

Documentation

Documentation of the tno.mpc.protocols.secure_comparison package can be found here.

Install

Easily install the tno.mpc.protocols.secure_comparison package using pip:

$ python -m pip install tno.mpc.protocols.secure_comparison

Note:

A significant performance improvement for some algorithms can be achieved by installing the GMPY2 library.

$ python -m pip install tno.mpc.protocols.secure_comparison[gmpy]

Usage

import asyncio

from tno.mpc.communication import Pool
from tno.mpc.encryption_schemes.dgk import DGK
from tno.mpc.encryption_schemes.paillier import Paillier
from tno.mpc.encryption_schemes.utils import next_prime

from tno.mpc.protocols.secure_comparison import Initiator, KeyHolder


async def run_protocol():
    taskA = asyncio.create_task(alice.perform_secure_comparison(x_enc, y_enc))
    taskB = asyncio.create_task(bob.perform_secure_comparison())

    x_leq_y_enc, _ = await asyncio.gather(*[taskA, taskB])
    x_leq_y = scheme_paillier.decrypt(x_leq_y_enc)
    assert x_leq_y == 1


if __name__ == "__main__":
    # Set maximum bit length
    l = 16
    # Setup the Paillier scheme
    scheme_paillier = Paillier.from_security_parameter(key_length=2048)
    # Setup the DGK scheme
    u = next_prime((1 << (l + 2)))
    scheme_dgk = DGK.from_security_parameter(
        v_bits=160, n_bits=2048, u=u, full_decryption=False
    )

    # Setup communication pools
    pool_alice = Pool()
    pool_alice.add_http_server(8040)
    pool_alice.add_http_client("keyholder", "localhost", 8041)
    pool_bob = Pool()
    pool_bob.add_http_server(8041)
    pool_bob.add_http_client("initiator", "localhost", 8040)

    # Encrypt two numbers (x,y) for the protocol and set the maximum bit_length (l)
    x = 23
    y = 42
    x_enc = scheme_paillier.encrypt(x)
    y_enc = scheme_paillier.encrypt(y)

    alice = Initiator(l, communicator=pool_alice, other_party="keyholder")
    bob = KeyHolder(
        l,
        communicator=pool_bob,
        other_party="initiator",
        scheme_paillier=scheme_paillier,
        scheme_dgk=scheme_dgk,
    )

    # Run entire protocol interactively:
    loop = asyncio.get_event_loop()
    loop.run_until_complete(run_protocol())

    # Or execute the protocol steps without interaction
    z_enc, r = alice.step_1(x_enc, y_enc, l, scheme_paillier)
    z, beta = bob.step_2(z_enc, l, scheme_paillier)
    alpha = alice.step_3(r, l)
    d_enc = bob.step_4a(z, scheme_dgk, scheme_paillier, l)
    beta_is_enc = bob.step_4b(beta, l, scheme_dgk)
    d_enc = alice.step_4c(d_enc, r, scheme_dgk, scheme_paillier)
    alpha_is_xor_beta_is_enc = alice.step_4d(alpha, beta_is_enc)
    w_is_enc, alpha_tilde = alice.step_4e(
        r, alpha, alpha_is_xor_beta_is_enc, d_enc, scheme_paillier
    )
    w_is_enc = alice.step_4f(w_is_enc)
    s, delta_a = alice.step_4g()
    c_is_enc = alice.step_4h(
        s, alpha, alpha_tilde, d_enc, beta_is_enc, w_is_enc, delta_a, scheme_dgk
    )
    c_is_enc = alice.step_4i(c_is_enc, scheme_dgk)
    delta_b = bob.step_4j(c_is_enc, scheme_dgk)
    zeta_1_enc, zeta_2_enc, delta_b_enc = bob.step_5(z, l, delta_b, scheme_paillier)
    beta_lt_alpha_enc = alice.step_6(delta_a, delta_b_enc)
    x_leq_y_enc = alice.step_7(
        zeta_1_enc, zeta_2_enc, r, l, beta_lt_alpha_enc, scheme_paillier
    )
    x_leq_y = scheme_paillier.decrypt(x_leq_y_enc)
    assert x_leq_y == 1

The communicator object is required only when the protocol is ran through perform_secure_comparison. In that case, one may choose to pass any communicator object that adheres to the tno.mpc.protocols.secure_comparison.Communicator protocol. An example can be found in the unit tests.

! SAFETY NOTICE ! ENSURE CIPHERTEXTS ARE RANDOMIZED

Since version 2.0.0 of tno.mpc.encryption_schemes.paillier and tno.mpc.encryption_schemes.dgk, it is possible to (potentially) make protocols more efficient by delaying randomization of ciphertexts. This library always operates in this 'expert' mode and therefore several protocol steps yield non-randomized ciphertext outputs. As a consequence, if the user chooses to perform the secure comparison steps manually, she needs to make sure that the resulting ciphertexts are randomized before they are communicated. If the tno.mpc.communication library is used (or more specifically, the Paillier and DGK serialize methods), then this will be done automatically for you (but warnings might be raised).

TNO-MPC / protocols.secure_comparison