Stefko222

Klipper-Input-Shaping-Assistant

Run Klipper's input shaping calibration without the need for a full Klipper setup.

creality-k1-klipper

Klipper is a 3d-printer firmware

SCS

Static Cooling System - It's Super Cool =)

Vz-Printhead-Printed

Printed version of the Vz-Printhead for Ratrig V-core, MGN12c Rails

MKS-GEN_L

MKS GEN_L is a powerful 3D printer control board with ATMEGA2560 and compatible with RAMPS. V2.1 version the motherboard integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC2209. It can be used after plugged in. No soldering or flying lead is required ...

Fatso

9mm Belt Mod for Voron V2.4 & Trident

VoronTrident-AluminumG

Aluminum Gantry (6mm and 9mm belts) for Voron Trident

V-Baby-CoreXY

CoreXY 3d Printer from Roy Berntsen

XO-Core-XY-Printer

Compact Enclosed Core XY 3D printer with design elements from multiple open-source printers

V-King-CoreXY

V-King Pro 3d Printer - No rod CoreXY V-Slot

docs

ZeroG Docs

K1-LinearRailSwap

This project is for the Creality K1 Speedy, not the K1 Max. It contains the information for how to swap one of the linear rods on the K1 x axis for a linear rail. The overall project goal is to make the K1 more modifiable and easier to maintain and tune.

K1-Hardware-Mods

D3vil Design's K1 and K1 Max Hardware Modifications

EBB

klipper_canbus

guide on setting up canbus in klipper

The100-v1.1-Encased

Encased variant of the frame of the The100 3D printed 3D printer.

VoronUsers

Voron Community mods

Vz-Printhead-CNC

V-Core-3-Vector3DEdition

Vector 3D Mods of the Rat Rig V-Core 3 3D Printer with EVA

Vcore-Mods

My mods for my Ratrig VCore3-300 build

rat-rig-vcore3-enclosure-mod

A mod for the Rat rig V-core 3 enclosure that replaces the 2 doors front with 1 door to enable better sealing

Creality-Helper-Script-Wiki

Wiki for Creality Helper Script

Unklicky

Drop in magnet based klicky probe

Voron-EVA-conversion

EVA to Voron Front rail adaptation

BRS-Printers-Mod

CYBORGCNC__RRVC3MOD

MaybeCube

MaybeCube: fully featured, rigid, high speed, affordable, coreXY linear rails 3D printer

Mantis-Xol

Modification of the Mantis toolhead by Long/Mandryd for 4010 blowers and other miscellaneous adjustments

Xol-Toolhead

Xol Toolhead is the evolution of 'Mantis Xol 2'. Aimed at modularity and quality of life improvements for installation and serviceability. We have left the mantis carriage behind, and thus are now just Xol sans Mantis. Don't worry, it's still a bit ugly. We wouldn't fix that.

Mantis-Xol

Modification of the Mantis toolhead by Long/Mandryd for 4010 blowers and other miscellaneous adjustments