AdamV3D / V-Core-3-Vector3DEdition

Vector 3D Mods of the Rat Rig V-Core 3 3D Printer with EVA

V-Core-3-Vector3DEdition

Vector 3D Mods of the Rat Rig V-Core (3 & 3.1) 3D Printer with EVA

General Change Goals

• improve printability especially for ABS.
• printed parts to require no treatment after printing.
• screw insertion to never require force

Common Changes

• Low layer chamfers changed from 45degrees to 63degrees.
• Screw Hole diameter increased to be 0.5mm larger than Metric size.
• Overhanging hole layer manipulation.

Print Settings

• Recommend ABS if possible, otherwise try Ooznest ABS Pro. Avoid esun abs+.
• I use 5 top, bottom and perimters
• 20-25% infill, gyroid or grid.
• 0.2mm layer height
• 0.4mm nozzle/line width

You can see more about my changes and mods to the V-Core 3 on youtube: https://youtube.com/playlist?list=PLWL37f39O8e8akqQdy8Pjt2n6UtyTdXjF