hardware: KiCad PCB files and bill of materials. Assembling a sprite? Check out https://roboticexplorationlab.github.io/sprite/ for an interactive BOM!
firmware: pre-built circuitpython bootloader.bin and firmware.uf2 (and the files to build it yourself)
software: circuitpython scripts and libraries working on the sprite
💡 Lots of applicable information also located on the PyCubed.org quickstart page.
Put all the files located in /software/ on to the sprite and start the serial console (as described above). After pressing Ctrl+C to halt the sprite, press any key to enter the REPL, then type
import NAMEOFFILE
and press enter to execute the example. For example, it we wanted to run blink.py, it would be...
import blink
- blink.py - will blink the green LED.
- i2c_IMU.py - samples all available sensors on the IMU and prints the results
- cursor.py - uses the X,Y data from the IMU accelerometer and moves the computer cursor accordingly
- cpc_test.py - example transmit message for the CC1101 radio