Beast code in Giters

PETRUSboy1's starred repositories

Emu_Black_DIY_Gauge

Adafruit Feather M4 CAN Express with 2.4" TFT FeatherWing displaying sensor values that are read from Ecumaster can stream

Language:PythonMIT300

Raspberry_Pi_gauge_cluster

Raspberry Pi 4 Model B, with 5 inch display working as car gauge cluster. Data is read from Ecumaster Emu Black can bus stream and from DIY Can bus device.

Language:PythonMIT700

arduino-mcp2515

Arduino MCP2515 CAN interface library

Language:C++MIT74500

EMUcan

ECUMaster EMU CAN Stream Reader Arduino Library

Language:C++GPL-3.02500

openOBC-devboard

currently the official openOBC firmware

Language:CNOASSERTION2000

PDU

Solid state power distribution unit

Language:C1000

OpenPDM

OpenPDM is an open-source programable Power Distribution Module for your car

Language:CMIT2600

PROFET-2-12V-Arduino-Shield

PROFET™+ 2 12V Arduino Shield for Arduino

Language:C++700

CoolBreaker

Automotive Circuit breaker to increase efficiency in your car's electrical system and solve for electrical hazards.

Language:C++200

EDCduino

Arduino based Interceptor ECU- crank angle & rail pressure interception, 2xPWM channels CRDi Diesel, GDi engines

Language:ArduinoGPL-3.0200

injector_tester

Arduino Injector Tester

Language:Arduino1300

ECU

Engine Control Unit Firmware implemented in Arduino Mega 2560 R3 to control Electronic Fuel Injection, based on PID Neural Network Control Algorithm

Language:C++1100

dmn-edc

Diesel engine control (Bosch VE / inline pumps)

Language:C++Unlicense1100

diy-fuel-injector-tester

A DIY fuel injector tester based on an arduino and a mofset.

Language:C++1600

FuelInjectorTester

An Arduino-based device used to control fuel injectors for testing purposes.

Language:C++200

revsafe

Arduino rev-limiter for my racing lawnmower.

Language:C++300

AVR-ECU

The AVR ECU Project is an attempt to create a basic open-source ECU based on the ATMega328P microcontroller to retrofit an EFI system to a Lifan 140cc single-cylinder petrol engine.

Language:C200

arduino-injector-tester

Fuel injector tester driver code

Language:C++GPL-3.0500

fuelsafe

Inline fuel sensor

Language:C++300

Saab_to_bmw_cluster_instrument

Sketch to be able to use a BMW E36 instrument cluster with a Saab Trionic 5 ECU (2.0T b204 and 2.3T b234 engines). You need an arduino, some resistors to make a voltage divider, and wires.

Language:C++100