OpenStickCommunity / GP2040-CE

Multi-Platform Gamepad Firmware for Raspberry Pi Pico and other RP2040 boards

https://gp2040-ce.info

OpenStickCommunity/GP2040-CE Issues

Add more macro button please!
Closed a month ago3
Add more hotkey outputs including DPad direction keys and LS/RS directions
Updated a month ago
Add generic button numbers for Generic HID mode's input history
Updated a month ago
Left(Right) Analog Stick X+Y added to Rotary Encoders Control Mode.
Updated a month ago
Directional inputs stuck sending last input when fast inputting multiple directionals
Closed a month ago1
[BUG] v0.7.9 LEDs may occasionally flicker in any mode if `USB Host` is enabled and a device is connected
Updated a month ago
Xinput mode does not boot when connected to iPad
Closed a month ago5
FEATURE REQUST: automatic detection of all platform and automatic switch to that mode
Closed a month ago1
OG Xbox mode - swapped Black and White buttons
Closed a month ago
[BUG] v0.7.9 status LED does not stay lit when enabled.
Updated a month ago
Missing labes for localization
Closed a month ago3
Add Haute42/COSMOX R16 16a button layout as a display layout
Updated a month ago1
When using the analog joystick of the Switch joycon, you can't push it full, only half. Would like to add a calibration option for the maximum value of the analog stick.
Closed a month ago6
GPIO29 Pin on Joystick not working
Closed 2 months ago1
d
Closed 2 months ago
Macro option "hold repeat" does not deactivate after release of button
Closed 2 months ago5
FEATURE REQUEST: Assign custom LED themes to individual profiles
Updated 2 months ago
Web Configurator Missing Chinese Translations
Updated 2 months ago1
Default i2c0/i2c1 set to enable when not configured in BoardConfig.h
Updated 2 months ago
Some screens do not work in 0.78 version
Closed 2 months ago12
LCD timeout setting doesn't work in 7.8
Closed 2 months ago4
Unable to Save Changes After Deleting Line in Macro Configuration (0.7.8)
Closed 2 months ago1
Changes in custom layout for the display don't update in real-time
Closed 2 months ago5
GPIO pins used for internal board functions are still mapable in the pin mapping page
Closed 2 months ago3
Unusual display configuration behavior after updating to 0.7.8
Closed 2 months ago5
LED lights to turn off after a preset time when idle
Updated 2 months ago2
8BitDo Keyboard wired or fob support for Keyboard USB Host add-on
Closed 2 months ago6
I want to add a GRB LED on the pi, what should I do?
Closed 2 months ago2
Request: add hotkey function to cycle through profiles
Closed 2 months ago
Feature Request: Ability to disable "negative edge" for action buttons
Closed 2 months ago2
Rotary encoder
Closed 2 months ago6
build instructions for developers
Closed 2 months ago4
Keyboard Host - Pressing combinations of Left Alt, Left Ctrl, and Left Shift result in no inputs
Closed 2 months ago
Keyboard Host - Unable to change input mode on boot using keyboard
Updated 2 months ago
Macro - Hold Press + Input results in flickering input rather than continuously held input
Closed 3 months ago2
Issue with rotatory encoders HW-040
Closed 3 months ago1
Keyboard mode does not work on MiSTer
Closed 3 months ago1
Feature Request: Allow tilt button to be used in macro or Allow tilt with another button assigned to one pin.
Updated 3 months ago1
When pressing the right + DDI right keys at the same time, is it possible to clear the previous key?
Closed 3 months ago2
Autocomplete half circle
Closed 3 months ago1
Latency test
Closed 3 months ago1
Macro frames bugs
Closed 3 months ago10
Stick display is flickering when neutral SOCD is active in 0.78
Closed 3 months ago1
Hope to add Left/Right Priority SOCD mode
Closed 4 months ago4
Haute42 g16 rgb led not working after reset
Closed 4 months ago1
WebConfig - If B1 is pressed 10 times will cause the display to freeze and causes webconfig to become non-responsive
Closed 4 months ago2
Hope to add Left\Right Priority SOCD mode
Closed 4 months ago2
The400 mini - is a configuration possible?
Closed 4 months ago4
Logitech pedal how to configure properly
Closed 4 months ago2
Add a Joystick Slider default to just use whatever is set in core, or remove the setting entirely
Updated 4 months ago