Stick display is flickering when neutral SOCD is active in 0.78
renzeiron opened this issue · comments
renzeiron commented
Expected Behavior
Stick display returns and stays in the neutral position when neutral SOCD is active, as it was in the version 0.77 of the firmware.
Current Behavior
As of 0.78, stick display is flickering when neutral SOCD is active. See the video below.
Context
- Firmware version: 0.78
- Board config: Haute 42 (GP2040-CE_0.7.8_Haute42.uf2)
- Device: Haute42 T16
- Purchased from the official Haute42 store at AliExpress
Steps to Reproduce
- Go to the Gamepad Settings page
- Make sure that SOCD Cleaning Mode is set to Neutral
- Go to the Display Configuration page
- In the Layout Options category choose "Stick" as one of the layouts
- Save and reboot the device
- Activate SOCD cleaning by pressing up and down or left and right simultaneously
Screenshots & Files
IMG_0522.mp4
Brian S. Stephan commented
@renzeiron This has been fixed and will be in the next release of the firmware.