NREL / resstock

Highly granular modeling of residential building stocks at national, regional, and local scales using OpenStudio/EnergyPlus.

https://resstock.nrel.gov

NREL/resstock Issues

Split out TVs and other technologies from Plug Loads
Closed 20 days ago1
Can't run resstock in parallel
Closed 24 days ago
Overestimating infiltration?
Updated 25 days ago7
Error: Element 'AssemblyEffectiveRValue': [facet 'minExclusive'] The value '0.0' must be greater than '0'.
Closed 25 days ago2
Include run folder name for local run
Closed 25 days ago1
HVAC Sizing for baseline and retrofit/new construction
Updated a month ago2
Hot water usage seems low
Updated a month ago
Data of floor area
Closed 2 months ago3
residential_quota_downselect for single family detached buildstock.csv
Closed 2 months ago7
Mixed timeseries reporting frequencies
Updated 3 months ago
Unmatched coordinates of surfaces in idf file
Closed 4 months ago2
Add IECC 2021 Climate Zone field
Updated 4 months ago1
LED and Lighting Saturations and Efficacies
Updated 4 months ago1
NG end uses not correlated
Updated 5 months ago2
Increase HVAC sizes for existing homes?
Closed 5 months ago3
Remove legacy HPWH options
Closed 5 months ago2
Roof connected to living space
Closed 5 months ago7
Expose and review 2x4 vs 2x6 exterior wall studs
Updated 5 months ago1
New cost multipliers for GHE length, depth, number of boreholes
Updated 6 months ago2
Model Heated Garages
Updated 6 months ago1
Empty weather folder trips up run_analysis.rb
Closed 6 months ago
Temperature Capacitance Multiplier default values
Updated 6 months ago2
Patched release with version comparison fix
Closed 6 months ago2
Account for baseline house duct size in the energy model
Updated 7 months ago10
Modeling a battery without PV
Updated 7 months ago3
Add SET degree-hour counts over entire year to QOI
Updated 7 months ago5
BuildStockBatch version check doesn't work
Closed 7 months ago2
Measure value spellings inconsistent between files
Updated 8 months ago1
Design temperatures being read incorrectly from newest TMY3 weather files
Closed 8 months ago7
heating system sizing for shared heating affected by envelope upgrade
Updated 9 months ago3
Water Heater Installation Location tsv
Closed 9 months ago2
`run_analysis.rb` doesn't handle illegal path characters
Closed 9 months ago
Ducted baseboard heaters
Updated 10 months ago4
Units can have ducts in conditioned space but leakage to outside > 0
Closed 10 months ago7
Typo for square feet area of multi-family (33171 needs to be reduced an order of magnitude)
Closed 10 months ago2
Create CI tests for catching warnings
Updated a year ago1
Peak reporting discrepancy
Closed a year ago7
Other Fuel for Heating leads to no heating system?
Closed a year ago4
Considerations around Mechanical Ventilation
Updated a year ago
Manufactured home belly ducts
Updated a year ago
Expose appliance design level as a measure parameter in options_lookup
Updated a year ago8
Some options in options_lookup.tsv are not in the sampling files
Closed a year ago2
Tighten integrity checks
Updated a year ago
Cambium start year harmonization
Closed a year ago4
Expose CompressorType variable for heat pumps
Closed a year ago5
Not all options in options_lookup.tsv are supported in projects_national lookups
Closed a year ago2
Power outage follow-up
Updated a year ago1
Reporting Vulnerability
Closed a year ago1
Segmentation Fault and then task abourts when running on a server
Closed a year ago
Improve test/check_buildstock.rb
Closed a year ago