ManfredHerrmann's repositories
Battery-Simulation
Simulate batteries for your PV system to find out how much you could increase your own consumption. Different battery and inverter sizes can be simulated. The batteries are simulated with your personal PV setup and power consumption profile. This information can be recorded e.g. from an energy meter.
dragino-end-node-decoder
decoder for dragino end node
midea-msmart
This is a library to allow communicating to a Midea AC via the Local area network.
python-can-remote
CAN over network bridge for Python
Driving-Industrial-Digitalization-with-LoRaWAN
Driving Industrial Digitalization with LoRaWAN, Published by Packt
huawei_solar
Home Assistant integration for Huawei Solar inverters via Modbus
astair
ASTAIR - Social & Smart HVAC Control Platform
awattar-statistics
simple visualization of aWATTar HOURLY dynamic prices
cangaroo
Open source can bus analyzer software - with support for CANable / CANable2, CANFD, and other new features
DeyeInverter
Small utility to read data from DEYE Inverters (and clones)
emhass
emhass: Energy Management for Home Assistant, is a Python module designed to optimize your home energy interfacing with Home Assistant.
ERPNext-installation-Guide
The complete guide to install ERPNext in your Ubuntu system
esphome-for-deye
Esphome component for Deye sun-12k-sg04lp3 to implement into home assistant
Logfiles-aus-Photovoltaikspeicher-auslesen
Auslesen von Logfiles aus einem Photovoltaikspeicher einer bestimmten Marke
lohnt-sich-awattar
calculator to estimate the cost of the awattar contract with your own historical data https://lohnt-sich-awattar.glitch.me/
mbpoll
command line utility to communicate with ModBus slave (RTU or TCP)
megaind-rpi
Command Line, Python, and Node-Red for Industrial Automation Card
openremote
100% open-source IoT Platform - Integrate your devices, create rules, and analyse and visualise your data
powerctrl
Answer modbus requests from Infinisolar/Voltronic hybrid solar inverters to run "power compensation mode"
pv-monitoring
Contains configuration and Grafana dashboard for monitoring PV inverters
pylontech-python
Functions to communicate to Pylontech Batteries using RS-485 serial communication
pyMeterBus
Pure Python implementation of the Meter-Bus (M-Bus EN13757-3) protocol.
python-pylontech
Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
qelectrotech-source-mirror
A mirror of the main QET repository, which is hosted at tuxfamily.org. Upstream repository: https://git.tuxfamily.org/qet/qet.git/ Bugtracker: https://qelectrotech.org/bugtracker/
rpi-cm4-ptp-guide
Guide to using the hardware PTP support in the Raspberry Pi CM4
sunsynk
Sunsynk Inverter Python library and Home Assistant OS Addon
tinytuya
Python API for Tuya WiFi smart devices using a direct local area network (LAN) connection or the cloud (TuyaCloud API).
UT210E
Information gathered on the Uni-T UT210E multimeter.