Jackwin / component_list

The electronic components that I have used in the FPGA design

Component_list

The electronic components that have been used in the FPGA design

DC-DC Converter

• LMZ31710
  • Input voltage range: [2.95V, 17V]
  • Maximum output current: 10A
  • Efficiency: up to 95%
  • Switching frequency: [200 KHz, 1.2MHz]
  • Operating temperature：[-40℃, 85℃]
  • Package: QFN
• LTM8027
  • Input voltage range:[4.5V, 60V]
  • Maximum output current: 4A
  • Efficiency: up to 95%
  • Switching frequency: [100 KHz, 500KHz]
  • Operating temperature：[-40℃, 125℃]
  • Package: BGA/LGA
• LT8645S
  • Input voltage range:[3.4V, 65V]
  • Maximum output current: 8A
  • Efficiency: up to 95%
  • Switching frequency: [200 KHz, 2MHz]
  • Operating temperature：[-40℃, 125℃]
  • Package: LQFN
• TLV62130
  • Input voltage range:[3V, 17V]
  • Maximum output current: 3A
  • Switching frequency: [1250 KHz, 2500KHz]
  • Package: QFN

LDO Regulator

• TPS74401
  • Input voltage range: [1.1V, 5.5V]
  • Maximum output current: 3A
  • Adjustable Output: [0.8V, 3.6V]
  • Dropout: 115 mV at 3.0 A (typical)
  • Operating junction temperature：[-40℃, 150℃]
  • Packge: VQFN, RGR, DDPAK
• MAX8902BATA+T
  • Low noise 500mA LDO
  • Input voltage range:[1.7, 5.5]
  • Adjustable Output: 1.5V, 1.8V, 2.0V, 2.5V, 3.0V, 3.1V, 3.3V, 4.6V, or 4.7V
  • 2mm x 2mm x 0.8mm TDFN Package

Voltage Translator

• TXS0108E
  • 8-bit Bi-directional level shifting
  • Applicable to open-drain and push-pull driver circuits
  • VCCA voltage [1.2V, 3.6V], VCCB voltage [1.65V, 5.5V]
  • Applicable to the open drain
  • Driven strength is weak
  • PCB trace is as short as possible to avoid the excessive capacitive loading
• NOTE: OE referenced to the VCCA
• TXS0104E
  • 4-bit Bi-directional level shifting
  • VCCA voltage [1.65V, 3.6V], VCCB voltage [2.3V, 5.5V]
  • NOTE: OE referenced to the VCCA
• TXS0102E
  • 2-bit Bi-directional level shifting
  • VCCA voltage [1.65V, 3.6V], VCCB voltage [2.3V, 5.5V]
  • NOTE: OE referenced to the VCCA
• SN74LVC8T245
  • 8-bit dual-supply level translation & 3-state output
  • Support 5V power supply
  • High driving capability
• SN74LV4T125
  • Single Power Supply
  • CMOS logic level translation
  • High driving capability
• SN74AXC4T774
  • 4-Bit Dual-Supply
  • Applicable to SPI bus

Voltage Supervisor(PWR-ON Reset)

• TPS3801xxx

  • Power on reset fixed delay
    • TPS3800 = 100 ms
    • TPS3801 = 200 ms
    • TPS3802 = 400 ms
  • Supply voltage: [2V, 6V]
  • Operating temperature：[-40℃, 85℃]
  • Packge: SOT-23

ADC

• AD9434

  • 12-Bit 370/500 MSPS 1.8V AD converter
  • Support SDR/DDR output format
  • 1.8V analog and digital supply voltage

• AD9826

  • 16-Bit image signal processor
  • 3-channel 16-Bit operation up to 15MSPS
  • 1-Channel 16-Bit Operation up to 12.5 MSPS
  • Support RGB channel sampling for the image processing
  • 3V/5V IO compatibility

Clock Generator

• AD9517-3
  • 12-channel output clocks
  • Integrated 2.0 GHz VCO or external VCO/VCXO to 2.4 GHz
  • 4 LVPECL outputs @ 1.6 GHz LVPECL outputs with jitter @ 225 fs rms
  • 4 LVDS clock outputs @ 800 MHz with jitter @ 275 fs rms
  • 4 LDVS outputs can be configured as 8 CMOS outputs

DAC

DDR

Oscillator

Peripheral