DutchDevelop / BLLEDController

DutchDevelop/BLLEDController Issues

Cannot Flash Firmware
Updated 2 months ago10
Support for WS2812 or similar Leds with Data pin?
Closed 3 months ago4
Feature Request: turn light on, when door is opened
Updated 3 months ago8
HMS advisories miscategorised as errors.
Updated 3 months ago4
LEDs remain on during First Layer Inspection
Closed 3 months ago1
Idle timeout is permanent till reboot
Updated 3 months ago2
Feature Request: Print Progress indication via LED
Updated 3 months ago1
Feature: Turn on LEDs only when actively printing
Updated 3 months ago9
Features: Color Selection, Flash, Rainbow Mode
Updated 3 months ago2
Feature: Turn on/off the led strip manualy during maintenance and/or replacing parts
Updated 3 months ago4
Features: Remote status
Updated 3 months ago2
stg_cur not in message - lights_report not in message
Updated 3 months ago3
Finish State is not left because of closing bracket at wrong position
Updated 3 months ago2
losing connection
Updated 3 months ago1
Version 5.1.24 does not switch off the LED's when the console switches off the Printer Light. Also Green status at the end of the print is not working
Updated 3 months ago4
Status of the LEDs
Updated 3 months ago2
Cannot update firmware
Updated 3 months ago
Feature: Manual control with brightness control
Closed 3 months ago1
Deserialize error while parsing mqtt
Closed 3 months ago83
In the new version 5.1.24 the leds red error checking no longer works
Updated 4 months ago1
Rename versions so they are sorted chronologically
Updated 4 months ago3
Can't upload New firmware with update menu
Closed 6 months ago2
dimming option please
Closed 8 months ago3
what is the default user name?
Closed 9 months ago1
Device turn the leds off after few hours
Closed 10 months ago1
Fetal to Fatal - mispelling of the mqtt status code
Closed 10 months ago