ESP32 433Mhz Receiver written in micropython and Tools for Windows
I used a ESP32 development board and a SRX882 receiver. Any other will be good.
There are lots of tutorial to connect it to the board.
This is not only a simple receiving program.
It transmit the results to UDP socket or to OpenHab.
Here you can develop and implement your own decoder.
You can configure the decoder output to a user friendly name or OpenHab Item
Config for SSID, Password, UDP socket IP and OpenHab URL
Install:
Copy the files rx433_ESP.py wifi.py and rx433_config.py to ESP32
Make a directory rx433_decoder and copy the decoder files.
connect the ESP32 via USB and be sure to enable Debug=on in the config file!
ESP_Config_Editor
Loads the config file via USB from ESP32. You can edit and save it back.
ESP32_Sniffer
The tool received the 433Mhz results via USB and show the raw data and the decoded data
You get a list of devices and address in your surrounding, thats usefull to create
the config file.