nMigen demos for iCESugar-Nano board

Usage

Project test under Ubuntu/Windows WSL/CentOS/msys2

Pull the project to your local

$git clone https://gitee.com/x55aa/icsnano_nmigen

Check tool chains:

$cd icsnano_nmigen
$./tools/check_tools.py --nmigen-gitee

if get error like **check_tools.py** is not executable, try $chmod +x ./tools/check_tools.py
for other errors, the message will guide you to resolve the problem.

Connect your iCESugar-nano

for Windows user, open hardware manager to confirm serial port : like COM4
for Linux user, serial device ' /dev/ttyACM0 ' is created. you can run dmesg | grep usb for more details
for WSL, the windows serial COMx mapped to /dev/ttySx
for msys2, following the case of Windows. target ports should be given like COMx

important notes:

confirm that you have access rights (w/r) for serial port and usbhid devices created by icelink.
if not, you can just change their access control by `$sudo chmod 666 /dev/xxx`.
but for general usage, it's recommended to setup your udev configure file to control the devices.
for details, please refer to:

https://github.com/trabucayre/openFPGALoader/blob/master/INSTALL.md#udev-rules

Build and program

$python3 wb_bridge.py

Test

$./tools/pmod_led.sh /dev/ttyS4
- change '/dev/ttyS4' to your device node.

this demo run with 'pmod_led' board, if you do not have one, you can try:$python3 blink.py

Project summary

blink.py : a simple blink demo

uart_echo.py : echo anything received from serial port. you can run 'screen /dev/ttySx' to test

wb_bridge.py : a wishbone bridge based serial control terminal gpio module mapped to 0x10000000, with PORT/DDR/PIN registers implemented you can read/write those register by tools/uterm.py utility

tools/check_tools.py : utility to check python and fpga toolchains. $./tools/check_tools.py --nmigen-gitee is recommanded (to install nmigen stuffs)

tools/pmod3_led.sh : bash script for pmod_led test

tools/uterm.py : communicate with wishbone bridge to control gpio module of wb_bridge project

0xcdef / icsnano_nmigen