WangXiaoHai's repositories
NRF52832-Fullduplex-Digtal-walkie
Fullduplex Digtal Walkie
x-cube-memsmic1
X-CUBE-MEMSMIC1 provides examples running on STM32 for the acquisition of ST analog and digital MEMS microphones. It also includes an example of ultrasound condition monitoring (UltrasoundFFT). It exploits also the Performance Mode of the MP23DB01HP MEMS digital microphone available on the STEVAL-MIC006V1 board.
abi-aa
Application Binary Interface for the Arm® Architecture
bl_docs
Datasheets and Reference Manual for BL602/BL808
embedded-makefile-flow
A guide and example project for setting up an open Makefile based embedded development tool-chain
esp-at
AT application for ESP32/ESP32-C2/ESP32-C3/ESP32-C6/ESP8266
ESP32-CSI-Tool
Extract Channel State Information from WiFi-enabled ESP32 Microcontroller. Active and Passive modes available. (https://stevenmhernandez.github.io/ESP32-CSI-Tool/)
fp-aud-aec1
FP-AUD-AEC1 STM32Cube Function Pack for Acoustic Echo Cancellation is a specific example fully focused on Acoustic Echo Cancellation and provides an implementation of a USB smart speaker use case with microphone.
fp-aud-smartmic1
FP-AUD-SMARTMIC1 provides a firmware running on STM32 which acquires audio signals of four digital MEMS microphones, elaborates them by means of embedded DSP libraries and streams the processed audio to both an USB host and a loudspeaker connected to the relevant expansion board.
HoloCubic
带网络功能的伪全息透明显示桌面站
Lab-Project-FreeRTOS-POSIX
This repository contains FreeRTOS+POSIX source code, which could be consumed as a submodule.
optimized-routines
Optimized implementations of various library functions for ARM architecture processors
WebRTC_AGC
Automatic Gain Control Module Port From WebRTC
liquid-dsp
digital signal processing library for software-defined radios
mbedtls
An open source, portable, easy to use, readable and flexible SSL library
samba
https://gitlab.com/samba-team/samba is the Official GitLab mirror of https://git.samba.org/samba.git -- Merge requests should be made on GitLab (not on GitHub)
TinyEKF
Lightweight C/C++ Extended Kalman Filter with Python for prototyping
x-cube-soundter1
The X-CUBE-SOUNDTER1 software package is an expansion for STM32Cube. This software provides drivers and middleware running on STM32 for interfacing with the STA350BW Sound Terminal component mounted on X-NUCLEO-CCA01M1 expansion board.
X-TRACK
A GPS bicycle speedometer that supports offline maps and track recording