zpzgone / docker-tron-quickstart

A complete private network for Tron development

Tron Quickstart (Docker image)

The purpose of it is to set up a complete private network for Tron development.

The image exposes:

• FullNode
• SolidityNode
• EventServer

Usage

Pull the image using docker:

docker pull trontools/quickstart

Run the container:

docker run -it \
  -p 9090:9090 \
  --rm \
  --name tron \
  trontools/quickstart

Notice the --rm option automatically removes the container after it exits. This is very important because the container cannot be restarted, it MUST be run from scratch to correctly configure the environment.

Verify the image is running correctly:

docker exec -it tron ps aux

You should see something like this:

USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root         1  0.0  0.0  20044  1900 pts/0    Ss+  01:42   0:00 bash ./quickstart v2.0.0
root        13  0.2  0.0  50148  1740 pts/0    Sl+  01:42   0:00 redis-server *:6379
root        15  0.0  0.0  20044    40 pts/0    S+   01:42   0:00 bash ./quickstart v2.0.0
root        16 11.5 19.2 5277964 393692 pts/0  Sl+  01:42   0:31 java -jar FullNode.jar -c fullnode.conf --witness
root        43  0.1  1.8 930932 37456 ?        Ssl  01:42   0:00 PM2 v3.3.1: God Daemon (/root/.pm2)
root        54  0.2  2.6 939316 54880 ?        Ssl  01:42   0:00 /tron/eventron/eventron
root        67  0.5  3.1 941540 64212 pts/0    Sl+  01:42   0:01 node /tron/app
root        72  412 32.0 5208448 655136 pts/0  Sl+  01:42  18:49 java -jar BlockParser.jar --Node-list 127.0.0.1 --intial-block 1 -end -1 --event-server http://127.0.0.1:8060 --secret-key TNSpckEZhGfZ4ryidHG2fYWMARLpZ6U139
root       261  0.0  0.1  20176  3748 pts/1    Ss   01:46   0:00 bash
root       289  0.0  0.1  36068  3168 pts/1    R+   01:47   0:00 ps aux

If redis-server, nodes, or the event server are not running, exit and run the container again.

To see the logs of the full node you can execute

docker exec -it tron tail -f /tron/FullNode/logs/tron.log

TronBox 2.1+ configuration

Configure your tronbox.js file as:

module.exports = {
  networks: {
    development: {
      privateKey: 'da146374a75310b9666e834ee4ad0866d6f4035967bfc76217c5a495fff9f0d0',
      fullHost: "http://127.0.0.1:9090",
      network_id: "9"
    }
  }
};

TronWeb configuration

Instantiate tronWeb as in the following example:

const TronWeb = require('tronweb')

const tronWeb = new TronWeb(
    "http://127.0.0.1:9090",
    "http://127.0.0.1:9090",
    "http://127.0.0.1:9090",
    'da146374a75310b9666e834ee4ad0866d6f4035967bfc76217c5a495fff9f0d0',
)

Testing

Tron Quickstart sets up accounts to be used for tests with TronBox 2.1+ (10 accounts by default). Once the transactions are mined, the final output is printed out:

Available Accounts
==================

(0) TJdDmJVYa9TcMJvCc9WsdaEXEYgeJrGVPq (100000 TRX)
(1) TNmLX3rJZNdq7kxgxs1y39FP3hp8LWHLUX (100000 TRX)
(2) TASrJ76QANNPRgdDHHikWWApQzxh3HPku4 (100000 TRX)
(3) TNkzaPqNipxKbU5ecUZz7P7UdejiE82zc7 (100000 TRX)
(4) TWCcS3cAVeNWhX1J6LHMEsEkWGq43t4EXc (100000 TRX)
(5) TW1QH88er9UqUKhoHLdm8dQTG2NsYU6C2h (100000 TRX)
(6) TKJu6vpKAknBwzovm5NiBZ1j69nWmeXGyw (100000 TRX)
(7) TQUddX2gBhGV7d33a2kZchVsPuWLdZBeXY (100000 TRX)
(8) TXjdePoR6ZRfBeiaZ9QoUyGwdHGhTPdy6x (100000 TRX)
(9) TGJnVM3TcvsKaDL3zpNm92gw2YHrPx8s3Y (100000 TRX)

Private Keys
==================

(0) 86134c8a51446c21b501f3a05844e18fdb72d3a5420867737c8640ce0ec656ca
(1) 57e04ac5484dd2c3d97b44c5e232b6203c2759642f38c5ea6787b0e4044de165
(2) 138a22c03039e688daa2b7c785d1e8d6b9375d4413e6ea82471b1e7a61701a9d
(3) e83a4958e81654efb162cef269e323ac501aa81d850ba9aed5a7d4f3c26d5a0a
(4) 05cdb18a4638d21d3f1f18e6bdb601a60b4debc85ee9bf8b385a2613693da24f
(5) b66225af9b24c9eb92ef65e3ff540c5c260de9fc8bb01a51fc44490bafe7ab3e
(6) 0b75b702316f1dcb2c7ca5aee9e1cd9bbdcf747e27fc417c324971caaf59772c
(7) 15e2547daf170c6f0e0dd0d64c35c1259206bc481a0c9d571bac0b1197f51d11
(8) 858c97998d9bebddc9320157e538d248dfcc64cd4c5c8ea97dfcb5d8396b37a0
(9) 32d2d45c05758f7de37a542798aac91315bd269565c99eafb33ebfb3a54ac046

HD Wallet
==================
Mnemonic:      treat nation math panel calm spy much obey moral hazard they sorry
Base HD Path:  m/44'/60'/0'/0/{account_index}

Quickstart options:

Use -e flag to pass environmental variables to the docker. Example:

docker run -it \
  -p 9090:9090 \
  --rm \
  --name tron \
  -e "accounts=20" \
  trontools/quickstart

List of options:

• accounts=12 sets the number of generated accounts
• useDefaultPrivateKey=true tells Quickstart to use the default account as accounts[0]
• mnemonic=wrong bit chicken kitchen rat uses a specified mnemonic
• defaultBalance=100000 sets the initial balance for the generated accounts (in the example to 100,000 TRX)
• seed=ushwe63hgeWUS sets the seed to be used to generate the mnemonic (if none is passed)
• hdPath=m/44'/60'/0'/0 sets a custom bit39 hdPath
• formatJson=true formats the output
• preapprove=... pre approved proposals (see below for more help)

Pre-approved proposals

To pre-approve, for example, getMultiSignFee and allowMultiSign, you can run the images as:

docker run -it \
  -p 9090:9090 \
  --rm \
  --name tron \
  -e "preapprove=multiSignFee:1,allowMultiSign:1" \
  trontools/quickstart

For a complete list of option proposals check out https://api.trongrid.io/wallet/getchainparameters. Note that you remove the "get" part of this chain parameter and lowercase the first character. This allows you to directly edit these parameters.

Available accounts

At any moment, to see the generated accounts, run

curl http://127.0.0.1:9090/admin/accounts

If you prefer to see the addresses in hex format you can run

curl http://127.0.0.1:9090/admin/accounts?format=hex

And if you like to see both formats, you can run

curl http://127.0.0.1:9090/admin/accounts?format=all

More accounts?

If your test requires additional accounts, use the following code to generate new addresses and retrieve them:

async function newTestAccounts(amount) => {
    return await tronWeb.fullNode.request('/admin/temporary-accounts-generation?accounts=' + amount);
}

async function getTestAccounts() => {
    const accounts = {
        b58: [],
        hex: [],
        pks: []
    }
    const accountsJson = await tronWeb.fullNode.request('/admin/accounts-json');
    accounts.pks = accountsJson.more[accountsJson.more.length - 1].privateKeys
    for (let i = 0; i < accounts.pks.length; i++) {
        let addr = tronWeb.address.fromPrivateKey(accounts.pks[i]);
        accounts.b58.push(addr);
        accounts.hex.push(tronWeb.address.toHex(addr));
    }
    return accounts;
}

Persistency

If you would like to use the same accounts each time, there are two ways to do that:

1. By passing a mnemonic to the docker
2. By using accounts.json

Example use of accounts.json:

if [[ ! -d "accounts-data" ]]; then mkdir accounts-data; fi

docker run -it -p 9090:9090 \
  --name tron \
  -v $PWD/accounts-data:/config \
  trontools/quickstart

If accounts-data/accounts.json exists, Tron Quickstart will use it each time it runs. If you need specific addresses, you can edit accounts.json, put your own private keys in the privateKeys array, and run the container.

Logging

By default, the proxy server returns a verbose log, containing the response of any command. If you prefer just to know what has been called, you can add the option -e "quiet=true". For consistency there is also the option -e "verbose=true". In case both "quiet=true" and "verbose=true" options are passed, the "verbose=true" takes precedence, with quiet being ignored.

verbose mode options:

• -e "showQueryString=true": shows the queryString of any command
• -e "showBody=true": shows the parameter passed to a POST command

Update environment variables

You can update environmental variables, at any time, with curl as follows:

curl http://127.0.0.1:9090/admin/set-env?showBody=true

Interacting with the private network

The easiest way to interact with the private network is by using TronWeb from the container:

docker exec -it tron ./tronWeb

It opens a console with a tronWeb instance ready to use. Run any command — for example: tronWeb.toHex("some") — to verify that it works.

What about RPC?

If you are running Tron Wallet-cli or any other tool which connects to the private network via RPC, you can just expose the ports . . . and voila!

docker run -it -p 50051:50051 -p 50052:50052 \
  --name tron \
  trontools/quickstart

Known issues

The "SERVER_BUSY" error

Running TronBox can put a lot of stress on the local network. If the FullNode is busy, it returns the "SERVER_BUSY" error. If it does, just repeat your command.

Latest version is 2.0.22

To be updated, take a look at https://hub.docker.com/r/trontools/quickstart/tags/

You can see which version you currently running executing

docker ps

If you want also to know which version of JavaTron is used by Tron Quickstart, run

curl localhost:9090/wallet/getnodeinfo

and look for codeVersion.

Selected recent history

Notice that deprecated version will stay here in the history but will be removed from the Docker hub.

2.1.1

• Upgrade Eventron to ed9c7a7, BlockParser to 75b4fec.

2.1.0

• Upgrade FullNode to 3.6.6.

2.0.22

• Fix hdPath.

2.0.21

• Extending the http body size.

2.0.20

• Update TronWeb to version 2.8.0 supporting Solidity 0.5.9.

2.0.19

• Update TronWeb to version 2.7.4.

2.0.18

• Update JavaTron to version 3.6.5.
• Update TronWeb to version 2.7.3.

2.0.17

• Update TronWeb to version 2.6.8.

2.0.17

• Update TronWeb to version 2.6.4.

2.0.16

• Pre-approve allowTvmConstantinople and others.

2.0.15

• Upgrade Eventron.

2.0.14

• Upgrade JavaTron to version 3.6.
• Upgrade TronWeb to version 2.5.6.

2.0.13

• Remove sleep dependency.

2.0.12

• Allow the proxy to accept large JSON files.

2.0.11

• Fix minor bug with unsupported APIs.

2.0.10

• Update eventron to version 2.2.8.
• Fix issue with APIs not supported in private networks.

2.0.9

• Update eventron to version 2.2.6.

2.0.8

• Update TronWeb to 2.3.6.
• Fix naming issue with JavaTron 3.2 approved proposals.

2.0.7

• Support generic pre-approved options.

2.0.6

• Disable caching in Eventron.

2.0.5

• Pre-approve JavaTron 3.2 proposals.

2.0.4

• Fix bug with fullnode not starting correctly.

2.0.3

• Fix bug with pre-approved proposals.

2.0.2

• Updates to TronGrid v2.2.0
• Updates to a new BlockParser using less resources

2.0.1

• Updates to TronGrid v2.1.1 (better support of sort by timestamps)

2.0.1

• Updates to TronGrid v2.1.1 (better support of sort by timestamps)

2.0.0

• Updates to JavaTron 3.5.0.1
• Uses TronGrid v2
• Supports pre-approved proposals, to be set using env variables (see above)
  • getMultiSignFee
  • getUpdateAccountPermissionFee
  • getTotalEnergyTargetLimit

1.2.8

• Supports pre-approved proposals, to be set using env variables (see above)
  • allowSameTokenName
  • allowDelegateResource
  • allowTvmTransferTrc10

1.2.7

• Updates to JavaTron v3.2.2.
• Supports events emitted by internal transactions.

1.2.6

• Uses JavaTron v3.2.1.2.
• Adds a script to have info about the current version of Tron Quickstart and JavaTron.

1.2.5

• Uses JavaTron v3.2.1.1.

1.2.4

• Allow to see the version of the current image from docker ps.

1.2.3

• Add CORS to any /admin routes that returns JSON objects.

1.2.2

• Introduce compatibility with JavaTron 3.2. It requires TronBox >= 2.2.1, because JavaTron 3.2 requires the new parameter origin_energy_limit.

---

For more historic data, check the original repo at https://github.com/tronprotocol/docker-tron-quickstart