A completed unit.
5x10k, 2x22, 2x2.2k
5x0.1uF, 2x22pF, 1x1uF and oscilator
Reset!
Tinning a diode pad
Sliding the diode in
Finishing the other side
Mislabeled Silk, C6 is 0.1uF, R1 is 2.2k
Another silk mistake, C5 is 0.1uF
22 = 22R0
103 = 10K
222 = 2.2K
A Properly connected Cap
Notice the angle on the capacitor joint. It is solid.
Showing the orientation of the MCU. Notice that the oscilator has 2 connected pads
Close up of the osc traces, notice the connection
Oscilator whacked in properly
TRRS/USB solder, notice the amount on the TRRS, you want as much as possible on there!
Proper placement
Position of the circle on the silks for the IO
Flux gunk before and after cleaning with alcohol
A beautiful MCU job. Notice the spaces.
Trackball PCB so you don't need to squint
Properly soldered leg on Trackball PCB
10K Resistors properly attached.
Leg not properly attached that came off PCB
