English | 中文
dperf is a DPDK based 100Gbps network performance and load testing software.
- High performance：
- Based on DPDK, dperf can generate huge traffic with a single x86 server: tens of millions of HTTP CPS，hundreds of Gbps throughput and billions of concurrent connections.
- Detailed statistics：
- Provides detailed statistics and identify every packet loss.
- Support multiple scenarios：
- Load testing and stability testing for Layer 4 Load Balancer and other Layer 4 gateways
- Network performance testing for servers on cloud
- Performance test of network package processing capability for NIC and CPU
- Can be used as a high performance HTTP server or client for load testing
| Client Cores | Server Cores | HTTP CPS |
|---|---|---|
| 1 | 1 | 2,101,044 |
| 2 | 2 | 4,000,423 |
| 4 | 4 | 7,010,743 |
| 6 | 6 | 10,027,172 |
| Client Cores | Server Cores | RX(Gbps) | TX(Gbps)) | Client CPU Usage(%) | Server CPU Usage(%) |
|---|---|---|---|---|---|
| 1 | 1 | 18 | 18 | 60 | 59 |
| 2 | 2 | 35 | 35 | 60 | 59 |
| 4 | 4 | 46 | 46 | 43 | 43 |
| Client Cores | Server Cores | Current Connections | Client CPU Usage(%) | Server CPU Usage(%) |
|---|---|---|---|---|
| 1 | 1 | 100,000,000 | 34 | 39 |
| 2 | 1 | 200,000,000 | 36 | 39 |
| 4 | 4 | 400,000,000 | 40 | 41 |
| Client Cores | TX MPPS | Client CPU Usage(%) |
|---|---|---|
| 1 | 15.96 | 95 |
| 2 | 29.95 | 95 |
| 4 | 34.92 | 67 |
| 6 | 35.92 | 54 |
| 8 | 37.12 | 22 |
Note: this test is under one 25Gbps Mellanox CX4
Above performance is obtained with below configurations:
- MEM: 512GB(hugepage 100GB)
- NIC: Mellanox MT27710 25Gbps * 2
- Kernel: 4.19.90
dperf outputs various statistics every second：
- TPS, CPS, various PPS
- Errors of TCP/Socket/HTTP
- Packets loss/drop
- Retransmissions of TCP Flags
seconds 22 cpuUsage 52
pktRx 3,001,058 pktTx 3,001,025 bitsRx 2,272,799,040 bitsTx 1,920,657,600 dropTx 0
arpRx 0 arpTx 0 icmpRx 0 icmpTx 0 otherRx 0 badRx 0
synRx 1,000,345 synTx 1,000,330 finRx 1,000,350 finTx 1,000,350 rstRx 0 rstTx 0
synRt 0 finRt 0 ackRt 0 pushRt 0 tcpDrop 0
skOpen 1,000,330 skClose 1,000,363 skCon 230 skErr 0
httpGet 1,000,345 http2XX 1,000,350 httpErr 0
ierrors 0 oerrors 0 imissed 0
#edit '/boot/grub2/grub.cfg' like this, and reboot the OS
linux16 /vmlinuz-... nopku transparent_hugepage=never default_hugepagesz=1G hugepagesz=1G hugepages=8
#edit 'config/common_base' to enable PMDs
#Mellanox CX4/CX5 requires 'CONFIG_RTE_LIBRTE_MLX5_PMD=y'
#HNS3 requires 'CONFIG_RTE_LIBRTE_HNS3_PMD=y'
#VMXNET3 requires 'CONFIG_RTE_LIBRTE_VMXNET3_PMD=y'
TARGET=x86_64-native-linuxapp-gcc #or arm64-armv8a-linuxapp-gcc
cd /root/dpdk/dpdk-stable-19.11.10
make install T=$TARGET -j16
cd dperf
make -j8 RTE_SDK=/root/dpdk/dpdk-stable-19.11.10 RTE_TARGET=$TARGET
#Mellanox NIC skip this step!
#Suppose your PCI number is 0000:1b:00.0
modprobe uio
modprobe uio_pci_generic
/root/dpdk/dpdk-stable-19.11.10/usertools/dpdk-devbind.py -b uio_pci_generic 0000:1b:00.0
#dperf server bind at 6.6.241.27:80, gateway is 6.6.241.1
./build/dperf -c test/http/server-cps.conf
#the client IP must be in the range of 'client' in the configuration file
ping 6.6.241.27
curl http://6.6.241.27/
Below example will start a HTTP CPS stress test.
#run dperf server
./build/dperf -c test/http/server-cps.conf
#from another host, run dperf client
./build/dperf -c test/http/client-cps.conf
- dperf requires that the HTTP message is in one packet, which is not suitable for the test of layer 7 load balancer;
- dperf requires exclusive use of the network interfaces.
- dperf does not have routing capability. It is recommended to build a test environment with a switch.
dperf welcomes your contribution. See the CONTRIBUTING file for details. Welcome to the development team, please contact Jianzhang Peng to add you to the developer mailing list.
- Jianzhang Peng - Initial work
dperf is distributed under the Apache License, Version 2.0.