#The OrangePi-Kernel contains Linux kernel sources (3.4.112 and 4.9) adapted for OrangePI H3 boards, gcc toolchain #The script "build_linux_kernel.sh" can be used to build the kernel
The kernel 4.9 only support USB WLAN MMC UART ETHERNET HDMI OTG, other function temporarily does not support
##Example1(how to make uImage 3.4.112)：
#$ cd OrangePI-Kernel
##cleans the kernel tree before build
#$ sudo ./build_linux_kernel.sh clean clean
##builds the uImage for OPI-PLUS(only two uImage,just plus,pi2),plus,plus2,plus2E use same uIamge,others use pi2 uImage
#$ sudo ./build_linux_kernel.sh plus
#$ cd ../OrangePi-BuildLinux
##build file system
#$ sudo ./create_image
##build plus image
#$ sudo ./image_from_dir ./linux-trusty orangepi ext4 opi-plus
#$ sudo dd bs=4M if=orangepi.img of=/dev/sd*
##Read and edit "params.sh" to adjust the parameters to your needs
##if you can not insmod modules,delete directory(/lib/modules) ,then copy /home/orangepi/3.4.112 to /lib/modules/,reboot
##Example2(how to make uImage 4.9 and uboot)：
#$ cd OrangePI-Kernel
##builds the u-boot-sunxi-with-spl.bin and boot.scr for OPI boards
#$ sudo ./build_mainline_uboot.sh [2 | pc | plus | lite | pc-plus | one | plus2e]
##cleans the uboot tree before build
#$ sudo ./build_linux_kernel_mainline.sh clean
##builds the uImage for OPI
#$ sudo ./build_linux_kernel_mainline.sh opi
#$ cd ../OrangePi-BuildLinux
##build file system
#$ sudo ./create_image
##build plus image
#$ sudo ./image_from_dir_mainline ./linux-trusty orangepi ext4 opi
#$ sudo dd bs=4M if=orangepi.img of=/dev/sd*
##Read and edit "params.sh" to adjust the parameters to your needs
##Example3(configure desktop)
##After BOOTING,to resize linux partition to fill sd card
#$ fs_resize
#$ reboot
##to install desktop run,please wait at least one hours
#$ install_lxde_desktop
#$ reboot
#*****************************************************
##Install software what your needs(just like follows)
##Install commom software #$ sudo install_common_software ##Language from english to chinese #$ sudo install_hanhua ##install mali，use glmark2-es2 test #$ sudo install_maliGPU ##install pepperflash #$ sudo install_pepperflash ##install samba #$ sudo install_samba ##install x2go #$ sudo install_x2goserver ##install vnc #$ sudo install_vnc ##install bypy(you can upload to baiduyun) #$ sudo install_bypy ##install btsync #$ sudo install_btsync ##install ibus chinese input method #$ sudo install_ibus_shuru ##install the camera driver, can be used to provide the official website of the camera #$ sudo install_camera_ko